Note: This page has been translated by MathWorks. Click here to see

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

This example shows how to use `mapreduce`

to carry out simple logistic regression using a single predictor. It demonstrates chaining multiple `mapreduce`

calls to carry out an iterative algorithm. Since each iteration requires a separate pass through the data, an anonymous function passes information from one iteration to the next to supply information directly to the mapper.

Create a datastore using the `airlinesmall.csv`

data set. This 12-megabyte data set contains 29 columns of flight information for several airline carriers, including arrival and departure times. In this example, the variables of interest are `ArrDelay`

(flight arrival delay) and `Distance`

(total flight distance).

ds = datastore('airlinesmall.csv', 'TreatAsMissing', 'NA'); ds.SelectedVariableNames = {'ArrDelay', 'Distance'};

The datastore treats `'NA'`

values as missing, and replaces the missing values with `NaN`

values by default. Additionally, the `SelectedVariableNames`

property allows you to work with only the specified variables of interest, which you can verify using `preview`

.

preview(ds)

ans = 8x2 table ArrDelay Distance ________ ________ 8 308 8 296 21 480 13 296 4 373 59 308 3 447 11 954

Logistic regression is a way to model the probability of an event as a function of another variable. In this example, logistic regression models the probability of a flight being more than 20 minutes late as a function of the flight distance, in thousands of miles.

To accomplish this logistic regression, the map and reduce functions must collectively perform a weighted least-squares regression based on the current coefficient values. The mapper computes a weighted sum of squares and cross product for each chunk of input data.

Display the map function file.

function logitMapper(b,t,~,intermKVStore) %logitMapper Mapper function for mapreduce to perform logistic regression. % Copyright 2014 The MathWorks, Inc. % Get data input table and remove any rows with missing values y = t.ArrDelay; x = t.Distance; t = ~isnan(x) & ~isnan(y); y = y(t)>20; % late by more than 20 min x = x(t)/1000; % distance in thousands of miles % Compute the linear combination of the predictors, and the estimated mean % probabilities, based on the coefficients from the previous iteration if ~isempty(b) % Compute xb as the linear combination using the current coefficient % values, and derive mean probabilities mu from them xb = b(1)+b(2)*x; mu = 1./(1+exp(-xb)); else % This is the first iteration. Compute starting values for mu that are % 1/4 if y=0 and 3/4 if y=1. Derive xb values from them. mu = (y+.5)/2; xb = log(mu./(1-mu)); end % To perform weighted least squares, compute a sum of squares and cross % products matrix: % (X'*W*X) = (X1'*W1*X1) + (X2'*W2*X2) + ... + (Xn'*Wn*Xn), % where X = [X1;X2;...;Xn] and W = [W1;W2;...;Wn]. % % The mapper receives one chunk at a time and computes one of the terms on % the right hand side. The reducer adds all of the terms to get the % quantity on the left hand side, and then performs the regression. w = (mu.*(1-mu)); % weights z = xb + (y - mu) .* 1./w; % adjusted response X = [ones(size(x)),x,z]; % matrix of unweighted data wss = X' * bsxfun(@times,w,X); % weighted cross-products X1'*W1*X1 % Store the results for this part of the data. add(intermKVStore, 'key', wss);

The reducer computes the regression coefficient estimates from the sums of squares and cross products.

Display the reduce function file.

function logitReducer(~,intermValIter,outKVStore) %logitReducer Reducer function for mapreduce to perform logistic regression % Copyright 2014 The MathWorks, Inc. % We will operate over chunks of the data, updating the count, mean, and % covariance each time we add a new chunk old = 0; % We want to perform weighted least squares. We do this by computing a sum % of squares and cross products matrix % M = (X'*W*X) = (X1'*W1*X1) + (X2'*W2*X2) + ... + (Xn'*Wn*Xn) % where X = X1;X2;...;Xn] and W = [W1;W2;...;Wn]. % % The mapper has computed the terms on the right hand side. Here in the % reducer we just add them up. while hasnext(intermValIter) new = getnext(intermValIter); old = old+new; end M = old; % the value on the left hand side % Compute coefficients estimates from M. M is a matrix of sums of squares % and cross products for [X Y] where X is the design matrix including a % constant term and Y is the adjusted response for this iteration. In other % words, Y has been included as an additional column of X. First we % separate them by extracting the X'*W*X part and the X'*W*Y part. XtWX = M(1:end-1,1:end-1); XtWY = M(1:end-1,end); % Solve the normal equations. b = XtWX\XtWY; % Return the vector of coefficient estimates. add(outKVStore, 'key', b);

Run `mapreduce`

iteratively by enclosing the calls to `mapreduce`

in a loop. The loop runs until the convergence criteria are met, with a maximum of five iterations.

% Define the coefficient vector, starting as empty for the first iteration. b = []; for iteration = 1:5 b_old = b; iteration % Here we will use an anonymous function as our mapper. This function % definition includes the value of b computed in the previous % iteration. mapper = @(t,ignore,intermKVStore) logitMapper(b,t,ignore,intermKVStore); result = mapreduce(ds, mapper, @logitReducer, 'Display', 'off'); tbl = readall(result); b = tbl.Value{1} % Stop iterating if we have converged. if ~isempty(b_old) && ... ~any(abs(b-b_old) > 1e-6 * abs(b_old)) break end end

iteration = 1 b = -1.7674 0.1209 iteration = 2 b = -1.8327 0.1807 iteration = 3 b = -1.8331 0.1806 iteration = 4 b = -1.8331 0.1806

Use the resulting regression coefficient estimates to plot a probability curve. This curve shows the probability of a flight being more than 20 minutes late as a function of the flight distance.

xx = linspace(0,4000); yy = 1./(1+exp(-b(1)-b(2)*(xx/1000))); plot(xx,yy); xlabel('Distance'); ylabel('Prob[Delay>20]')

Was this topic helpful?