Number of data bits to transmit
You can configure
DataBits to be
8. Data is transmitted as a series of five,
six, seven, or eight bits with the least significant bit sent first.
At least seven data bits are required to transmit ASCII characters.
Eight bits are required to transmit binary data. Five and six bit
data formats are used for specialized communications equipment.
Note: Both the computer and the peripheral device must be configured to transmit the same number of data bits.
In addition to the data bits, the serial data format consists
of a start bit, one or two stop bits, and possibly a parity bit. You
specify the number of stop bits with the
and the type of parity checking with the
To display the supported number of data bits for the serial ports on your platform, see Finding Serial Port Information for Your Platform.
DataBits can be
8. The default value is