Connect to mobile device
connector on enables MATLAB® Connector™ software
on your machine (
localhost), allowing you to access
your MATLAB session from a mobile device such as an iPhone, iPod touch,
or Android device. If you have not defined a password, the connector
issues a prompt to do so.
connector on enables
the connector and sets or changes the password. Passwords can contain
letters and numbers, and must contain at least five characters. The
maximum length is 32 characters. MATLAB stores your password
with your preferences.
connector ('on','port', enables
the connector and sets the port. If you are not using the default
port, 31415, you must set it every time you start the connector.
connector off disables the connector.
If the default port, 31415, is unavailable when you start the connector , the connector increments the port number by one until it finds an available port. To check which port the connector is using, start the connector and look at the URL it displays for the test link.
To test the connector, open a Web browser and navigate
If you did not change the port, use the default:
To enable the connector anytime MATLAB is running
on your computer, modify or create
to turn the connector on and off. Define
your startup folder, and
finish.m anywhere on the MATLAB search