Note: This page has been translated by MathWorks. Please click here

To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

**Superclasses: **

OPC UA node aggregate function ID enumeration

OPC UA servers can return historical data as an aggregate of
some function performed on the data history at particular periods.
When you request processed data using the `readProcessed`

function,
you specify an Aggregate to use, and an Aggregate Interval of time
over which to perform that Aggregate function. The server then performs
the Aggregate function on each period of Aggregate Interval defined,
returning one value associated with all the data in that interval.
For example, the "Maximum" Aggregate Function returns the maximum
value in the Aggregate Interval; the Range Aggregate Function returns
the difference between the highest and lowest value in the aggregate
interval.

OPC UA Aggregates are represented in MATLAB^{®} by a character
vector defining the Aggregate Function, or by the opc.ua.AggregateFnId
enumeration class. For example, to specify that a `readProcessed`

operation
use the Maximum Aggregate Function, you can use either of the following
syntaxes:

readProcessed(UaClient,NodeList,'Maximum',...) readProcessed(UaClient,NodeList, opc.ua.AggregateFnId.Maximum,...)

When an OPC UA Client is connected to an OPC UA server, the
client’s `AggregateFunctions`

property stores
a list of aggregate functions supported by that server. Servers need
not implement every Aggregate Function defined by the OPC UA Standard,
but must publish the Aggregate Functions that are supported by that
server. Use the `AggregateFunctions`

property to
ensure that the aggregate function you need is supported by the server.
Note, however, that the server might not implement that function for
all Variable nodes on the server. If you attempt to retrieve processed
data from the server, you might get an "Unsupported Aggregate Function"
error, even if the aggregate function is reported as being supported
by the server.

The following functions are defined by the OPC Foundation.

Function | Description |
---|---|

`AnnotationCount` | Retrieve the number of Annotations in the interval. |

`Average` | Retrieve the average value of the data over the interval. |

`Count` | Retrieve the number of raw values over the interval. |

`Delta` | Retrieve the difference between the `Start` and `End` values
in the interval. |

`DeltaBounds` | Retrieve the difference between the `StartBound` and `EndBound` values
in the interval. |

`DurationBad` | Retrieve the total duration of time in the interval during which the data is bad. |

`DurationGood` | Retrieve the total duration of time in the interval during which the data is good. |

`DurationInStateNonZero` | Retrieve the time a Boolean or numeric was in a nonzero state using Simple Bounding Values. |

`DurationInStateZero` | Retrieve the time a Boolean or numeric was in a zero state using Simple Bounding Values. |

`End` | Retrieve the value at the end of the interval using Interpolated Bounding Values. |

`EndBound` | Retrieve the value at the end of the interval using Simple Bounding Values. |

`Interpolative` | At the beginning of each interval, retrieve the calculated value from the data points on either side of the requested timestamp. |

`Maximum` | Retrieve the maximum raw value in the interval with the timestamp of the start of the interval. |

`Maximum2` | Retrieve the maximum value in the interval including the Simple Bounding Values. |

`MaximumActualTime` | Retrieve the maximum value in the interval and the timestamp of the maximum value. |

`MaximumActualTime2` | Retrieve the maximum value with the actual timestamp including the Simple Bounding Values. |

`Minimum` | Retrieve the minimum raw value in the interval with the timestamp of the start of the interval. |

`Minimum2` | Retrieve the minimum value in the interval including the Simple Bounding Values. |

`MinimumActualTime` | Retrieve the minimum value in the interval and the timestamp of the minimum value. |

`MinimumActualTime2` | Retrieve the minimum value with the actual timestamp including the Simple Bounding Values. |

`NumberOfTransitions` | Retrieve the number of changes between zero and nonzero that a Boolean or Numeric value experienced in the interval. |

`PercentBad` | Retrieve the percent of data (0 to 100) in the interval which has bad StatusCode. |

`PercentGood` | Retrieve the percent of data (0 to 100) in the interval which has good StatusCode. |

`Range` | Retrieve the difference between the `Minimum` and `Maximum` values
over the interval. |

`Range2` | Retrieve the difference between the `Minimum2` and `Maximum2` values
over the interval. |

`StandardDeviationPopulation` | Retrieve the standard deviation for the interval for a complete population (n) which includes Simple Bounding Values. |

`StandardDeviationSample` | Retrieve the standard deviation for the interval for a sample of the population (n-1). |

`Start` | Retrieve the value at the beginning of the interval using Interpolated Bounding Values. |

`StartBound` | Retrieve the value at the beginning of the interval using Simple Bounding Values. |

`TimeAverage` | Retrieve the time weighted average data over the interval using Interpolated Bounding Values. |

`TimeAverage2` | Retrieve the time weighted average data over the interval using Simple Bounding Values. |

`Total` | Retrieve the total (time integral) of the data over the interval using Interpolated Bounding Values. |

`Total2` | Retrieve the total (time integral) of the data over the interval using Simple Bounding Values. |

`VariancePopulation` | Retrieve the variance for the interval as calculated by the `StandardDeviationPopulation` which
includes Simple Bounding Values. |

`VarianceSample` | Retrieve the variance for the interval as calculated by the `StandardDeviationSample` . |

`WorstQuality` | Retrieve the worst StatusCode of data in the interval. |

`WorstQuality2` | Retrieve the worst StatusCode of data in the interval including the Simple Bounding Values. |

Was this topic helpful?