Turn grid on/off.
Adjust the grid spacing.
Turn the "snap-to-grid" feature on/off.
Change the scaling of the drawing axes.
Turn the "axis equal" feature on/off.
Turn off Toolbar Help
Turn off help texts for the toolbar buttons.
Turn zoom feature on/off.
Select application mode.
Redisplay all graphical objects in the PDE app.
In the Grid Spacing dialog box, you can adjust the x-axis
and y-axis grid spacing. By default, the MATLAB® automatic
linear grid spacing is used. If you turn off the Auto check
box, the edit fields for linear spacing and extra ticks are enabled.
For example, the default linear spacing
be changed to
-1.5:0.2:1.5. In addition, you can
add extra ticks so that the grid can be customized to aid in drawing
the desired 2-D domain. Extra tick entries can be separated using
spaces, commas, semicolons, or brackets.
pi 2/3, 0.78, 1.1 -0.123; pi/4
Clicking the Apply button applies the entered grid spacing; clicking the Done button ends the Grid Spacing dialog.
In the Axes Limits dialog box, the range of the x-axis
and the y-axis can be adjusted. The axis range
should be entered as a 1-by-2 MATLAB vector such as
10]. If you select the Auto check box,
automatic scaling of the axis is used.
Clicking the Apply button applies the entered axis ranges; clicking the Close button ends the Axes Limits dialog.
From the Application submenu, you can select from 10 available application modes. The application modes can also be selected using the pop-up menu in the upper right corner of the PDE app.
The available application modes are:
Generic Scalar (the default mode)
Structural Mechanics — Plane Stress
Structural Mechanics — Plane Strain
AC Power Electromagnetics
Conductive Media DC