This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

Ideal Heat Flow Sensor

Ideal heat flow meter


Thermal Sensors


The Ideal Heat Flow Sensor block represents an ideal heat flow meter, that is, a device that converts a heat flow passing through the meter into a control signal proportional to this flow. The meter must be connected in series with the component whose heat flow is being monitored.

Connections A and B are thermal conserving ports. Port H is a physical signal port that outputs the heat flow value.

The block positive direction is from port A to port B.


The block has the following ports:


Thermal conserving port associated with the sensor positive probe.


Thermal conserving port associated with the sensor negative probe.


Physical signal output port for heat flow.

Introduced in R2007b

Was this topic helpful?