Linear inductor in electrical systems
The Inductor block models a linear inductor, described with the following equation:
The Series resistance and Parallel conductance parameters represent small parasitic effects. The series resistance can be used to represent the DC winding resistance or the resistance due to the skin effect. Simulation of some circuits may require the presence of a small parallel conductance. For more information, see Modeling Best Practices.
Connections + and – are conserving electrical ports corresponding to the positive and negative terminals of the inductor, respectively. The current is positive if it flows from positive to negative, and the voltage across the inductor is equal to the difference between the voltage at the positive and the negative terminal, V(+) – V(–).
Use the Variables tab in the block dialog box (or the Variables section in the block Property Inspector) to set the priority and initial target values for the block variables prior to simulation. For more information, see Set Priority and Initial Target for Block Variables.
Inductance, in henries. The default value is
Represents small parasitic effects. The series resistance can
be used to represent the DC winding resistance. The default value
Represents small parasitic effects. The parallel conductance
across the inductor can be used to model insulation conductance. Simulation
of some circuits may require the presence of a small parallel conductance.
The default value is
The block has the following ports:
Electrical conserving port associated with the inductor positive terminal.
Electrical conserving port associated with the inductor negative terminal.