Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

PS Saturation

Limit range of physical signal

Library

Physical Signals/Nonlinear Operators

Description

The PS Saturation block imposes upper and lower bounds on a physical signal. When the input signal is within the range specified by the Lower limit and Upper limit parameters, the input signal passes through unchanged. When the input signal is outside these bounds, the signal is clipped to the upper or lower bound.

When the Lower limit and Upper limit parameters are set to the same value, the block outputs that value.

Both the input and the output are physical signals.

Parameters

Upper limit

The upper bound on the input signal. When the input signal to the PS Saturation block is above this value, the output of the block is clipped to this value. The default is 0.5.

Lower limit

The lower bound on the input signal. When the input signal to the PS Saturation block is below this value, the output of the block is clipped to this value. The default is -0.5.

Ports

The block has one physical signal input port and one physical signal output port.

See Also

Introduced in R2007a

Was this topic helpful?