Note: This page has been translated by MathWorks. Click here to see

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Alphabetical List
By Category

Ideal Force Sensor | Force sensor in mechanical translational systems |

Ideal Rotational Motion Sensor | Motion sensor in mechanical rotational systems |

Ideal Torque Sensor | Torque sensor in mechanical rotational systems |

Ideal Translational Motion Sensor | Motion sensor in mechanical translational systems |

Ideal Angular Velocity Source | Ideal angular velocity source in mechanical rotational systems |

Ideal Force Source | Ideal source of mechanical energy that generates force proportional to the input signal |

Ideal Torque Source | Ideal source of mechanical energy that generates torque proportional to the input signal |

Ideal Translational Velocity Source | Ideal velocity source in mechanical translational systems |

Gear Box | Gear box in mechanical systems |

Lever | Generic mechanical lever |

Wheel and Axle | Wheel and axle mechanism in mechanical systems |

Inertia | Ideal mechanical rotational inertia |

Mechanical Rotational Reference | Reference connection for mechanical rotational ports |

Rotational Damper | Viscous damper in mechanical rotational systems |

Rotational Free End | Rotational port terminator with zero torque |

Rotational Friction | Friction in contact between rotating bodies |

Rotational Hard Stop | Double-sided rotational hard stop |

Rotational Inerter | Two-port inertia in mechanical rotational systems |

Rotational Spring | Ideal spring in mechanical rotational systems |

Mass | Ideal mechanical translational mass |

Mechanical Translational Reference | Reference connection for mechanical translational ports |

Translational Damper | Viscous damper in mechanical translational systems |

Translational Free End | Translational port terminator with zero force |

Translational Friction | Friction in contact between moving bodies |

Translational Hard Stop | Double-sided translational hard stop |

Translational Inerter | Two-port inertia in mechanical translational systems |

Translational Spring | Ideal spring in mechanical translational systems |

Capacitor | Linear capacitor in electrical systems |

Diode | Piecewise linear diode in electrical systems |

Electrical Reference | Connection to electrical ground |

Gyrator | Ideal gyrator in electrical systems |

Ideal Transformer | Ideal transformer in electrical systems |

Inductor | Linear inductor in electrical systems |

Infinite Resistance | Electrical element for setting initial voltage difference between two nodes |

Memristor | Ideal memristor with nonlinear dopant drift approach |

Mutual Inductor | Mutual inductor in electrical systems |

Op-Amp | Ideal operational amplifier |

Open Circuit | Electrical port terminator that draws no current |

Resistor | Linear resistor in electrical systems |

Rotational Electromechanical Converter | Interface between electrical and mechanical rotational domains |

Switch | Switch controlled by external physical signal |

Thermal Resistor | Resistor with thermal port |

Translational Electromechanical Converter | Interface between electrical and mechanical translational domains |

Variable Resistor | Linear variable resistor in electrical systems |

Current Sensor | Current sensor in electrical systems |

Voltage Sensor | Voltage sensor in electrical systems |

AC Current Source | Ideal sinusoidal current source |

AC Voltage Source | Ideal constant voltage source |

Controlled Current Source | Ideal current source driven by input signal |

Controlled Voltage Source | Ideal voltage source driven by input signal |

Current-Controlled Current Source | Linear current-controlled current source |

Current-Controlled Voltage Source | Linear current-controlled voltage source |

DC Current Source | Ideal constant current source |

DC Voltage Source | Ideal constant voltage source |

Voltage-Controlled Current Source | Linear voltage-controlled current source |

Voltage-Controlled Voltage Source | Linear voltage-controlled voltage source |

Electromagnetic Converter | Lossless electromagnetic energy conversion device |

Fundamental Reluctance | Simplified implementation of magnetic reluctance |

Magnetic Reference | Reference connection for magnetic ports |

Reluctance | Magnetic reluctance |

Reluctance Force Actuator | Magnetomotive device based on reluctance force |

Variable Reluctance | Variable reluctance in electromagnetic systems |

Flux Sensor | Ideal flux sensor |

MMF Sensor | Ideal magnetomotive force sensor |

Controlled Flux Source | Ideal flux source driven by input signal |

Controlled MMF Source | Ideal magnetomotive force source driven by input signal |

Flux Source | Ideal flux source |

MMF Source | Ideal magnetomotive force source |

Constant Area Hydraulic Orifice | Hydraulic orifice with constant cross-sectional area |

Constant Volume Hydraulic Chamber | Hydraulic capacity of constant volume |

Fluid Inertia | Pressure differential across tube or channel due to change in fluid velocity |

Hydraulic Cap | Hydraulic port terminator with zero flow |

Hydraulic Piston Chamber | Variable volume hydraulic capacity in cylinders |

Hydraulic Reference | Connection to atmospheric pressure |

Hydraulic Resistive Tube | Hydraulic pipeline which accounts for friction losses only |

Infinite Hydraulic Resistance | Hydraulic element for setting initial pressure difference between two nodes |

Linear Hydraulic Resistance | Hydraulic pipeline with linear resistance losses |

Rotational Hydro-Mechanical Converter | Interface between hydraulic and mechanical rotational domains |

Translational Hydro-Mechanical Converter | Interface between hydraulic and mechanical translational domains |

Variable Area Hydraulic Orifice | Hydraulic variable orifice created by cylindrical spool and sleeve |

Variable Hydraulic Chamber | Hydraulic capacity of variable volume with compressible fluid |

Hydraulic Flow Rate Sensor | Ideal flow meter |

Hydraulic Pressure Sensor | Ideal pressure sensing device |

Hydraulic Constant Flow Rate Source | Ideal source of hydraulic energy, characterized by constant flow rate |

Hydraulic Constant Mass Flow Rate Source | Ideal source of mechanical energy in hydraulic network, characterized by constant mass flow rate |

Hydraulic Constant Pressure Source | Ideal source of hydraulic energy, characterized by constant pressure |

Hydraulic Flow Rate Source | Ideal source of hydraulic energy, characterized by flow rate |

Hydraulic Mass Flow Rate Source | Ideal source of mechanical energy in hydraulic network, characterized by mass flow rate |

Hydraulic Pressure Source | Ideal source of hydraulic energy, characterized by pressure |

Custom Hydraulic Fluid | Working fluid properties, set by specifying parameter values |

2-Port Constant Volume Chamber (TL) | Chamber with two ports and fixed volume of thermal liquid |

3-Port Constant Volume Chamber (TL) | Chamber with three ports and fixed volume of thermal liquid |

Absolute Reference (TL) | Reference point at zero absolute temperature and pressure |

Cap (TL) | Perfectly insulated stop to fluid flow |

Constant Volume Chamber (TL) | Chamber with one port and fixed volume of thermal liquid |

Controlled Reservoir (TL) | Thermal liquid reservoir at time-varying temperature |

Flow Resistance (TL) | General resistance in a thermal liquid branch |

Infinite Flow Resistance (TL) | Perfectly insulated barrier between thermal liquid networks |

Local Restriction (TL) | Time-invariant reduction in flow area |

Pipe (TL) | Rigid conduit for fluid flow in thermal liquid systems |

Reservoir (TL) | Thermal liquid reservoir at constant temperature and pressure |

Rotational Mechanical Converter (TL) | Interface between thermal liquid and mechanical rotational networks |

Translational Mechanical Converter (TL) | Interface between thermal liquid and mechanical translational networks |

Variable Local Restriction (TL) | Time-varying reduction in flow area |

Mass & Energy Flow Rate Sensor (TL) | Measure mass and energy flow rates |

Pressure & Temperature Sensor (TL) | Measure pressure and temperature differences |

Thermodynamic Properties Sensor (TL) | Measure specific internal energy, density, and specific heat at constant pressure |

Volumetric Flow Rate Sensor (TL) | Measure volumetric flow rate |

Controlled Mass Flow Rate Source (TL) | Generate time-varying mass flow rate |

Controlled Pressure Source (TL) | Generate time-varying pressure differential |

Controlled Volumetric Flow Rate Source (TL) | Generate time-varying volumetric flow rate |

Mass Flow Rate Source (TL) | Generate constant mass flow rate |

Pressure Source (TL) | Generate constant pressure differential |

Volumetric Flow Rate Source (TL) | Generate constant volumetric flow rate |

Thermal Liquid Settings (TL) | Physical properties of a thermal liquid |

2-Port Constant Volume Chamber (2P) | Chamber with two ports and fixed volume of two-phase fluid |

3-Port Constant Volume Chamber (2P) | Chamber with three ports and fixed volume of two-phase fluid |

Absolute Reference (2P) | Reference point at zero absolute pressure and specific internal energy |

Cap (2P) | Perfectly insulated stop to fluid flow |

Constant Volume Chamber (2P) | Chamber with one port and fixed volume of two-phase fluid |

Flow Resistance (2P) | General resistance in a two-phase fluid branch |

Infinite Flow Resistance (2P) | Perfectly insulated barrier between two-phase fluid networks |

Local Restriction (2P) | Fixed flow resistance |

Pipe (2P) | Rigid conduit for fluid flow in two-phase fluid systems |

Reservoir (2P) | Two-phase fluid reservoir at constant temperature and pressure |

Rotational Mechanical Converter (2P) | Interface between two-phase fluid and mechanical rotational networks |

Translational Mechanical Converter (2P) | Interface between two-phase fluid and mechanical translational networks |

Variable Local Restriction (2P) | Time-varying flow resistance |

Mass & Energy Flow Rate Sensor (2P) | Measure mass and energy flow rates |

Pressure & Internal Energy Sensor (2P) | Measure pressure and specific internal energy differences |

Thermodynamic Properties Sensor (2P) | Measure temperature, specific enthalpy, specific volume, and vapor quality |

Volumetric Flow Rate Sensor (2P) | Measure volumetric flow rate |

Controlled Mass Flow Rate Source (2P) | Generate time-varying mass flow rate |

Controlled Pressure Source (2P) | Generate time-varying pressure differential |

Controlled Volumetric Flow Rate Source (2P) | Generate time-varying volumetric flow rate |

Mass Flow Rate Source (2P) | Generate constant mass flow rate |

Pressure Source (2P) | Generate constant pressure differential |

Volumetric Flow Rate Source (2P) | Generate constant volumetric flow rate |

Two-Phase Fluid Properties (2P) | Fluid properties in two-phase fluid network |

2-Port Constant Volume Chamber (G) | Chamber with two ports and fixed volume of gas |

3-Port Constant Volume Chamber (G) | Rigid chamber with constant volume of gas |

Absolute Reference (G) | Reference point at zero absolute temperature and pressure |

Cap (G) | Gas port terminator with zero flow |

Constant Volume Chamber (G) | Chamber with one port and fixed volume of gas |

Controlled Reservoir (G) | Boundary conditions for gas network at time-varying pressure and temperature |

Flow Resistance (G) | General resistance in a gas branch |

Infinite Flow Resistance (G) | Perfectly insulated barrier between gas networks |

Local Restriction (G) | Fixed restriction in flow area |

Pipe (G) | Rigid conduit for gas flow |

Reservoir (G) | Boundary conditions for gas network at constant pressure and temperature |

Rotational Mechanical Converter (G) | Interface between gas and mechanical rotational networks |

Translational Mechanical Converter (G) | Interface between gas and mechanical translational networks |

Variable Local Restriction (G) | Time-varying restriction in flow area |

Mass & Energy Flow Rate Sensor (G) | Measure mass and energy flow rates |

Pressure & Temperature Sensor (G) | Measure pressure and temperature differences |

Thermodynamic Properties Sensor (G) | Measure specific enthalpy, density, specific heat at constant pressure, and specific entropy |

Controlled Mass Flow Rate Source (G) | Generate time-varying mass flow rate |

Controlled Pressure Source (G) | Generate time-varying pressure differential |

Mass Flow Rate Source (G) | Generate constant mass flow rate |

Pressure Source (G) | Generate constant pressure differential |

Gas Properties (G) | Global gas properties for attached circuit |

2-Port Constant Volume Chamber (MA) | Chamber with two ports and fixed volume of moist air |

3-Port Constant Volume Chamber (MA) | Chamber with three ports and fixed volume of moist air |

Absolute Reference (MA) | Reference point at zero absolute temperature and pressure |

Cap (MA) | Moist air port terminator with zero flow |

Constant Volume Chamber (MA) | Chamber with one port and fixed volume of moist air |

Controlled Reservoir (MA) | Boundary conditions for moist air network at time-varying pressure, temperature, moisture, and trace gas levels |

Flow Resistance (MA) | General resistance in a moist air branch |

Infinite Flow Resistance (MA) | Perfectly insulated barrier between moist air networks |

Local Restriction (MA) | Fixed restriction in flow area |

Pipe (MA) | Rigid conduit for moist air flow |

Reservoir (MA) | Boundary conditions for moist air network at constant pressure, temperature, moisture, and trace gas levels |

Rotational Mechanical Converter (MA) | Interface between moist air and mechanical rotational networks |

Translational Mechanical Converter (MA) | Interface between moist air and mechanical translational networks |

Variable Local Restriction (MA) | Time-varying restriction in flow area |

Humidity & Trace Gas Sensor (MA) | Measure humidity and trace gas levels in moist air network |

Mass & Energy Flow Rate Sensor (MA) | Measure mass and energy flow rates in a moist air network |

Measurement Selector (MA) | Measure pressure, temperature, humidity, and trace gas levels in moist air internal volumes |

Pressure & Temperature Sensor (MA) | Measure pressure and temperature differences |

Thermodynamic Properties Sensor (MA) | Measure specific enthalpy, density, specific heat at constant pressure, and specific entropy of air mixture |

Volumetric Flow Rate Sensor (MA) | Measure volumetric flow rate in a moist air network |

Controlled Mass Flow Rate Source (MA) | Generate time-varying mass flow rate |

Controlled Pressure Source (MA) | Generate time-varying pressure differential |

Controlled Volumetric Flow Rate Source (MA) | Generate time-varying volumetric flow rate |

Mass Flow Rate Source (MA) | Generate constant mass flow rate |

Pressure Source (MA) | Generate constant pressure differential |

Volumetric Flow Rate Source (MA) | Generate constant volumetric flow rate |

Controlled Moisture Source (MA) | Inject or extract moisture at a time-varying rate |

Controlled Trace Gas Source (MA) | Inject or extract trace gas at a time-varying rate |

Moisture & Trace Gas Cap (MA) | Moist air source port terminator |

Moisture Source (MA) | Inject or extract moisture at a constant rate |

Trace Gas Source (MA) | Inject or extract trace gas at a constant rate |

Moist Air Properties (MA) | Global moist air properties for attached circuit |

Conductive Heat Transfer | Heat transfer by conduction |

Convective Heat Transfer | Heat transfer by convection |

Infinite Thermal Resistance | Thermal element for setting initial temperature difference between two nodes |

Perfect Insulator | Thermal element with perfect insulation and no thermal mass |

Radiative Heat Transfer | Heat transfer by radiation |

Thermal Mass | Mass in thermal systems |

Thermal Resistance | Constant resistance in thermal systems |

Thermal Reference | Reference connection for thermal ports |

Variable Thermal Resistance | Variable resistance in thermal systems |

Heat Flow Rate Sensor | Ideal heat flow meter |

Temperature Sensor | Ideal temperature sensor |

Controlled Heat Flow Rate Source | Variable source of thermal energy, characterized by heat flow |

Controlled Temperature Source | Variable source of thermal energy, characterized by temperature |

Heat Flow Rate Source | Constant source of thermal energy, characterized by heat flow |

Temperature Source | Constant source of thermal energy, characterized by temperature |

PS Constant Delay | Delay input physical signal by specified time |

PS Variable Delay | Delay input physical signal by variable time |

Asynchronous Sample & Hold | Output sample-and-hold signal with external trigger |

PS Add | Add two physical signal inputs |

PS Divide | Compute simple division of two input physical signals |

PS Gain | Multiply input physical signal by constant |

PS Math Function | Apply mathematical function to input physical signal |

PS Product | Multiply two physical signal inputs |

PS Subtract | Compute simple subtraction of two input physical signals |

PS Integrator | Integrate physical signal |

PS Lookup Table (1D) | Approximate one-dimensional function using specified lookup method |

PS Lookup Table (2D) | Approximate two-dimensional function using specified lookup method |

PS Lookup Table (3D) | Approximate three-dimensional function using specified lookup method |

PS Lookup Table (4D) | Approximate four-dimensional function using specified lookup method |

PS Abs | Output absolute value of input physical signal |

PS Ceil | Output the smallest integer larger than or equal to input physical signal |

PS Dead Zone | Provide region of zero output for physical signals |

PS Fix | Round input physical signal toward zero |

PS Floor | Output the largest integer smaller than or equal to input physical signal |

PS Max | Output maximum of two input physical signals |

PS Min | Output minimum of two input physical signals |

PS Round | Round input physical signal toward nearest integer |

PS Saturation | Limit range of physical signal |

PS Sign | Output sign of input physical signal |

PS Switch | Single-pole double-throw switch controlled by external physical signal |

PS Constant Offset Estimator | Measure constant offset value of periodic signal |

PS Harmonic Estimator (Amplitude, Phase) | Measure harmonic amplitude and phase of periodic signal |

PS Harmonic Estimator (Real, Imaginary) | Measure real and imaginary parts of periodic signal harmonic |

PS RMS Estimator | Measure RMS value of periodic signal |

PS Terminator | Terminator for unconnected physical signal outputs |

Counter | Increment output signal by 1 with every time step |

PS Constant | Generate constant physical signal |

Random Number | Generate normally distributed random numbers for physical modeling |

Repeating Sequence | Output periodic piecewise linear signal |

Uniform Random Number | Generate uniformly distributed random numbers for physical modeling |

Connection Port | Physical Modeling connector port for subsystem |

PS-Simulink Converter | Convert physical signal into Simulink output signal |

Simulink-PS Converter | Convert Simulink input signal into physical signal |

Solver Configuration | Physical Networks environment and solver configuration |

Spectrum Analyzer | Display frequency spectrum of time-domain signals |

Simscape Component | Deploy Simscape language component as custom block in model diagram |

Simscape Component | Deploy Simscape language component as custom block in model diagram |

Was this topic helpful?