In this example, you export a Stewart platform assembly from a Creo™ (Pro/ENGINEER®) CAD platform. The export procedure generates one XML file and a set of geometry files that you can import into SimMechanics™ to generate a new second-generation model.
The example begins with a procedure to export the CAD assembly. Information on CAD files and CAD Export follows the export procedure. To import the robot assembly into a SimMechanics Second Generation model, see Import Robot Arm Model.
The following figure shows the Stewart platform assembly you export in this example.
To successfully complete this example, you must meet the following requirements:
Have the latest version of SimMechanics Link installed on your machine.
Have completed the linking procedure for your Creo installation. The linking procedure adds a SimMechanics Link add-in to the Creo installation.
Have access to the Stewart Platform example files that accompany the SimMechanics Link installation. See About the Example CAD Files.
Before you can export the robot assembly, you must load the assembly in a Creo session.
Open Creo on your machine.
Select File > Open
Navigate to the file directory that contains the robot CAD files.
Note: The directory that contains the robot CAD files for the Creo platform is
The CAD platform opens the Stewart platform assembly.
Once you successfully open the CAD assembly in your Creo installation, you can export the assembly in second-generation format:
In the Creo toolbar, select SimMechanics Link > Export and click SimMechanics Second Generation....
In the File name: field of the Select Folder dialog box, enter select a directory to export the files into.
Do not enter a name in the File name field.
The field should contain only a dot
In the new dialog box, enter file name
click the green arrow.
Note: SimMechanics Link generates a new SimMechanics Import XML file and a set of geometry files that you can import into a second-generation model.
You can proceed to import the robot assembly into a SimMechanics Second
Generation model. The import model assumes the SimMechanics Import
XML file you generated in this example has the name
If the file has a different name, change the name to
proceeding. See Import Robot Arm Model.
Confirm the following files exist in the specified export directory:
The CAD assembly files are present in your SimMechanics Link installation. You can access the files in the following directory:
If you are not sure what your MATLAB root directory is,
at the MATLAB command line enter
\stewart directory contains a set of
CAD files that define each CAD part and CAD assembly. Part file names
contain the file extension .PRT. Assembly file names contain the extension
The CAD export procedure generates one SimMechanics Import XML file and a set of geometry files. The XML file contains the structure of the assembly and the parameters that define each part. The geometry files define the 3-D geometry of each part. Once the export procedure is complete, you can import the SimMechanics Import XML file into SimMechanics. SimMechanics uses the file to automatically generate a new SimMechanics Second Generation model.
You can export a CAD assembly in first- or second-generation formats. Export in first-generation format generates a Physical Modeling XML file. Export in second-generation format generates a SimMechanics Import XML file.
When you import the CAD assembly, you must use the appropriate
command for the format selected. If you export a model in first-generation
format, you must use the
If you export a model in second-generation format, you must use the