## Documentation Center |

AC and DC sources, breakers, transformers, RLC branches
and loads, transmission lines

AC Current Source | Implement sinusoidal current source |

AC Voltage Source | Implement sinusoidal voltage source |

Battery | Implement generic battery model |

Controlled Current Source | Implement controlled current source |

Controlled Voltage Source | Implement controlled voltage source |

DC Voltage Source | Implement DC voltage source |

Three-Phase Programmable Voltage Source | Implement three-phase voltage source with programmable time variation of amplitude, phase, frequency, and harmonics |

Three-Phase Source | Implement three-phase source with internal R-L impedance |

Linear Transformer | Implement two- or three-winding linear transformer |

Grounding Transformer | Implement three-phase grounding transformer providing a neutral in three-wire system |

Saturable Transformer | Implement two- or three-winding saturable transformer |

Multi-Winding Transformer | Implement multi-winding transformer with taps |

Three-Phase Transformer (Three Windings) | Implement three-phase transformer with configurable winding connections |

Three-Phase Transformer (Two Windings) | Implement three-phase transformer with configurable winding connections |

Three-Phase Transformer 12 Terminals | Implement three single-phase, two-winding transformers where all terminals are accessible |

Three-Phase Transformer Inductance Matrix Type (Three Windings) | Implement three-phase three-winding transformer with configurable winding connections and core geometry |

Three-Phase Transformer Inductance Matrix Type (Two Windings) | Implement three-phase two-winding transformer with configurable winding connections and core geometry |

Zigzag Phase-Shifting Transformer | Implement zigzag phase-shifting transformer with configurable secondary winding connection |

Three-Phase OLTC Regulating Transformer (Phasor Type) | Implement phasor model of three-phase OLTC regulating transformer |

Three-Phase OLTC Phase Shifting Transformer Delta-Hexagonal (Phasor Type) | Implement phasor model of three-phase OLTC phase-shifting transformer using delta hexagonal connection |

PI Section Line | Implement single-phase transmission line with lumped parameters |

Distributed Parameter Line | Implement N-phase distributed parameter transmission line model with lumped losses |

Three-Phase PI Section Line | Implement three-phase transmission line section with lumped parameters |

Series RLC Branch | Implement series RLC branch |

Series RLC Load | Implement linear series RLC load |

Parallel RLC Branch | Implement parallel RLC branch |

Parallel RLC Load | Implement linear parallel RLC load |

Mutual Inductance | Implement inductances with mutual coupling |

Three-Phase Harmonic Filter | Implement four types of three-phase harmonic filters using RLC components |

Three-Phase Dynamic Load | Implement three-phase dynamic load with active power and reactive power as function of voltage or controlled from external input |

Three-Phase Series RLC Branch | Implement three-phase series RLC branch |

Three-Phase Series RLC Load | Implement three-phase series RLC load with selectable connection |

Three-Phase Parallel RLC Branch | Implement three-phase parallel RLC branch |

Three-Phase Parallel RLC Load | Implement three-phase parallel RLC load with selectable connection |

Three-Phase Mutual Inductance Z1-Z0 | Implement three-phase impedance with mutual coupling among phases |

Breaker | Implement circuit breaker opening at current zero crossing |

Three-Phase Breaker | Implement three-phase circuit breaker opening at current zero crossing |

Three-Phase Fault | Implement programmable phase-to-phase and phase-to-ground fault breaker system |

Ground | Provide connection to ground |

Neutral | Implement common node in circuit |

Surge Arrester | Implement metal-oxide surge arrester |

Connection Port | Create Physical Modeling connector port for subsystem |

power_new | Create new SimPowerSystems model populated by required and commonly used blocks |

power_cableparam | Compute RLC parameters of radial copper cables with single screen, based on conductor and insulator characteristics |

power_hysteresis | View and edit hysteresis characteristic for saturable core of Saturable Transformer blocks |

power_lineparam | Compute RLC parameters of overhead transmission line from its conductor characteristics and tower geometry |

Was this topic helpful?