Passive Devices

Transformers, RLC branches and loads, transmission lines

Simscape Blocks

Delta-Connected Load Three-phase load wired in delta configuration
RLC Three-phase line impedance
Transmission Line Three-phase transmission line using lumped-parameter pi-line model
Wye-Connected Load Three-phase load wired in wye configuration
Enabled Fault Signal-enabled single-phase, two-phase, or three-phase grounded or ungrounded fault
Time-Based Fault Time-based single-phase, two-phase or three-phase grounded or ungrounded fault
Nonlinear Inductor Model inductor with nonideal core
Nonlinear Transformer Model transformer with nonideal core
Wye-Connected Variable Load Three-phase variable load wired in wye configuration
Wye-Connected Variable Load (lagging) Three-phase variable, lagging load wired in wye configuration
Delta-Delta Transformer Linear nonideal delta-delta transformer with three-limb core
Delta1-Delta1-Wye Transformer Linear nonideal delta1-delta1-wye transformer with three-limb core
Delta11-Delta11-Wye Transformer Linear nonideal delta11-delta11-wye transformer with three-limb core
Wye-Delta1 Transformer Linear nonideal wye-delta1 transformer with three-limb core
Wye-Delta1-Wye Transformer Linear nonideal wye-delta1-wye transformer with three-limb core
Wye-Delta11 Transformer Linear nonideal wye-delta11 transformer with three-limb core
Wye-Delta11-Wye Transformer Linear nonideal wye-delta11-wye transformer with three-limb core
Wye-Wye Transformer Linear nonideal wye-wye transformer with three-limb core
Zigzag-Delta1-Wye Transformer Linear nonideal zigzag-delta1-wye transformer with three-limb core
Zigzag-Delta11-Wye Transformer Linear nonideal zigzag-delta11-wye transformer with three-limb core
Primary Winding Linear nonideal transformer winding
Secondary Winding Linear nonideal transformer winding


Essential Power Engineering Modeling Techniques

Apply Simscape™ modeling rules when you build three-phase networks using Simscape Power Systems™ Simscape Components.

Three-Phase Ports

Connect three-phase blocks using composite ports for three-phase lines or expanded ports for single-phase lines.

Was this topic helpful?