Implement three-phase parallel RLC branch
The Three-Phase Parallel RLC Branch block implements three balanced branches consisting each of a resistor, an inductor, a capacitor, or a parallel combination of these. Use the Branch type parameter to select elements you want to include in each branch.
Negative values are allowed for resistance, inductance, and capacitance.
Select the elements you want to include in the branch. The R letter defines the resistor, the L letter defines the inductor, and the C letter defines the capacitor. Select Open circuit to define an open circuit (R=inf, L=inf, C=0). Only existing elements are displayed in the block icon.
The branch resistances, in ohms (Ω).
The branch inductances, in henries (H).
The branch capacitances, in farads (F).
Branch voltages to measure the three
voltages across the Three-Phase Parallel RLC Branch block terminals.
Branch currents to measure the three
total currents (sum of R, L, C currents) flowing through the Three-Phase
Parallel RLC Branch block.
Branch voltages and currents to measure
the three voltages and the three currents of the Three-Phase Parallel
RLC Branch block.
Place a Multimeter block in your model to display the selected measurements during the simulation. In the Available Measurements list box of the Multimeter block, the measurements are identified by a label followed by the block name.
Branch voltages of phases A, B, and C
Branch currents of phases A, B, and C