Implement three-phase series RLC branch
The Three-Phase Series RLC Branch block implements three balanced branches consisting each of a resistor, an inductor, or a capacitor or a series combination of these. Use the Branch type parameter to select elements you want to include in each branch.
Negative values are allowed for resistance, inductance, and capacitance.
Select the elements you want to include in the branch. The R letter defines the resistor, the L letter defines the inductor, and the C letter defines the capacitor. Select Open
circuit to define an open circuit (R=0, L=0, C=inf). Only
existing elements are displayed in the block icon. Default is
The branch resistances, in ohms (Ω). Default is
The branch inductances, in henries (H). Default is
The branch capacitances, in farads (F). Default is
Branch voltages to measure
the three voltages across the Three-Phase Series RLC Branch block
Branch currents to measure
the three currents flowing through the Three-Phase Series RLC Branch
Branch voltages and currents to
measure the three voltages and the three currents of the Three-Phase
Series RLC Branch block.
Place a Multimeter block in your model to display the selected measurements during the simulation. In the Available Measurements list box of the Multimeter block, the measurements are identified by a label followed by the block name.