Measure voltage in circuit
The Voltage Measurement block measures the instantaneous voltage between two electric nodes. The output provides a Simulink® signal that can be used by other Simulink blocks.
Specifies the format of the output signal when the block is used in a phasor simulation. The Output signal parameter is disabled when the block is not used in a phasor simulation. The phasor simulation is activated by a Powergui block placed in the model.
Complex (default) to output the measured
current as a complex value. The output is a complex signal.
Real-Imag to output the real and imaginary
parts of the measured current. The output is a vector of two elements.
Magnitude-Angle to output the magnitude
and angle of the measured current. The output is a vector of two elements.
Magnitude to output the magnitude
of the measured current. The output is a scalar value.