Convert hybrid h-parameters to S-parameters


s_params = h2s(h_params,z0)


s_params = h2s(h_params,z0) converts the hybrid parameters h_params into the scattering parameters s_params. The h_params input is a complex 2-by-2-by-M array, representing M 2-port hybrid h-parameters. z0 is the reference impedance; its default is 50 ohms. s_params is a complex 2-by-2-by-M array, representing M 2-port S-parameters.


You can also use network parameter objects to perform network parameter conversions. For more information, see RF Network Parameter Objects.


Convert h-parameters to S-parameters:

%Define a matrix of h-parameters.
h_11 =      0.314441556185771 +      2.51960941000598i;
h_12 =      0.999823389146385 -  0.000246785162909241i;
h_21 =     -1.000115600382660 -  0.000129304649930592i;
h_22 = -6.55389515512306e-007 + 6.67541048071651e-006i;
h_params = [h_11,h_12; h_21,h_22];
%Convert to S-parameters
s_params = h2s(h_params);

See Also

| | | | |

Was this topic helpful?