Convert S-parameters to hybrid h-parameters


h_params = s2h(s_params,z0)


h_params = s2h(s_params,z0) converts the scattering parameters s_params into the hybrid parameters h_params. The s_params input is a complex 2-by-2-by-M array, representing M 2-port S-parameters. z0 is the reference impedance; its default is 50 ohms. h_params is a complex 2-by-2-by-M array, representing M 2-port hybrid h-parameters.


You can also use network parameter objects to perform network parameter conversions. For more information, see RF Network Parameter Objects.


Convert S-parameters to h-parameters:

%Define a matrix of S-parameters
s_11 = 0.61*exp(j*165/180*pi);
s_21 = 3.72*exp(j*59/180*pi);
s_12 = 0.05*exp(j*42/180*pi);
s_22 = 0.45*exp(j*(-48/180)*pi);
s_params = [s_11 s_12; s_21 s_22];
z0 = 50;
%Convert to h-parameters
h_params = s2h(s_params,z0)

See Also

Was this topic helpful?