This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.


List valid formats for specified circuit object parameter


list = listformat(h,'parameter')


list = listformat(h,'parameter') lists the allowable formats for the specified network parameter. The first listed format is the default format for the specified parameter.

In these lists, 'Abs' and 'Mag' are the same as 'Magnitude (linear)', and 'Angle' is the same as 'Angle (degrees)'.

When you plot phase information as a function of frequency, RF Toolbox™ software unwraps the phase data using the MATLAB® unwrap function. The resulting plot is only meaningful if the phase data varies smoothly as a function of frequency, as described in the unwrap reference page. If your data does not meet this requirement, you must obtain data on a finer frequency grid.

Use the listparam method to get the valid parameters of a circuit object.


Before calling listformat, you must use the analyze method to perform a frequency domain analysis for the circuit object.


collapse all

List the available formats of analysis of a transmission line.

trl = rfckt.txline;
f = [1e9:1.0e7:3e9];
ans =

  11x1 cell array

    {'dB'                  }
    {'Magnitude (decibels)'}
    {'Abs'                 }
    {'Mag'                 }
    {'Magnitude (linear)'  }
    {'Angle'               }
    {'Angle (degrees)'     }
    {'Angle (radians)'     }
    {'Real'                }
    {'Imag'                }
    {'Imaginary'           }

Introduced before R2006a

Was this topic helpful?