Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

listparam

List valid parameters for specified circuit object

Syntax

list = listparam(h)

Description

list = listparam(h) lists the valid parameters for the specified circuit object h.

Note

Before calling listparam, you must use the analyze method to perform a frequency domain analysis for the circuit object.

Several parameters are available for all objects. When you import rfckt.amplifier, rfckt.mixer, or rfdata.data object specifications from a .p2d or .s2d file, the list of valid parameters also includes any operating conditions from the file that have numeric values, such as bias.

The following table describes the most commonly available parameters.

ParameterDescription

S11, S12, S21, S22

LS11, LS12, LS21, LS22 (Amplifier and mixer objects with multiple operating conditions only)

S-parameters
GroupDelayGroup delay
GammaIn, GammaOutInput and output reflection coefficients
VSWRIn, VSWROutInput and output voltage standing-wave ratio
IIP3, OIP3 (Amplifier and mixer objects only)Third-order intercept point
NFNoise figure
TF1Ratio of the load voltage to the output voltage of the source when the input port is conjugate matched
TF2Ratio of load voltage to the source voltage
  • Gt

  • Ga

  • Gp

  • Gmag

  • Gmsg

  • Transducer power gain

  • Available power gain

  • Operating power gain

  • Maximum available power gain

  • Maximum stable gain

GammaMS, GammaMLSource and load reflection coefficients for simultaneous conjugate match
K, Mu, MuPrimeStability factor
DeltaStability condition

Examples

collapse all

List the available parameters of analysis of a transmission line.

trl = rfckt.txline;
f = [1e9:1.0e7:3e9];
analyze(trl,f);
listparam(trl)
ans =

  28x1 cell array

    {'S11'       }
    {'S12'       }
    {'S21'       }
    {'S22'       }
    {'GroupDelay'}
    {'GammaIn'   }
    {'GammaOut'  }
    {'VSWRIn'    }
    {'VSWROut'   }
    {'OIP3'      }
    {'IIP3'      }
    {'NF'        }
    {'NFactor'   }
    {'NTemp'     }
    {'TF1'       }
    {'TF2'       }
    {'TF3'       }
    {'Gt'        }
    {'Ga'        }
    {'Gp'        }
    {'Gmag'      }
    {'Gmsg'      }
    {'GammaMS'   }
    {'GammaML'   }
    {'K'         }
    {'Delta'     }
    {'Mu'        }
    {'MuPrime'   }

Introduced before R2006a

Was this topic helpful?