# Documentation

### This is machine translation

Translated by
Mouseover text to see original. Click the button below to return to the English verison of the page.

To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

# s2t

Convert S-parameters to T-parameters

## Syntax

t_params = s2t(s_params)

## Description

t_params = s2t(s_params) converts the scattering parameters s_params into the chain scattering parameters t_params. The s_params input is a complex 2-by-2-by-M array, representing M 2-port S-parameters. t_params is a complex 2-by-2-by-M array, representing M 2-port T-parameters.

This function uses the following definition for T-parameters:

$\left[\begin{array}{c}{a}_{1}\\ {b}_{1}\end{array}\right]=\left[\begin{array}{cc}{T}_{11}& {T}_{12}\\ {T}_{21}& {T}_{22}\end{array}\right]\left[\begin{array}{c}{b}_{2}\\ {a}_{2}\end{array}\right],$

where:

• a1 is the incident wave at the first port.

• b1 is the reflected wave at the first port.

• a2 is the incident wave at the second port.

• b2 is the reflected wave at the second port.

## Examples

collapse all

Convert S-parameters to T-parameters. Define a matrix of S-parameters.

s11 = 0.61*exp(j*165/180*pi);
s21 = 3.72*exp(j*59/180*pi);
s12 = 0.05*exp(j*42/180*pi);
s22 = 0.45*exp(j*(-48/180)*pi);
s_params = [s11 s12; s21 s22];

Convert to T-parameters

t_params = s2t(s_params)
t_params =

0.1385 - 0.2304i   0.0354 + 0.1157i
-0.0452 + 0.1576i  -0.0019 - 0.0291i

## References

Gonzalez, Guillermo, Microwave Transistor Amplifiers: Analysis and Design, 2nd edition. Prentice-Hall, 1997, p. 25.