Note: This page has been translated by MathWorks. Please click here

To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

Stability factor *μ* of 2-port network

[mu,muprime] = stabilitymu(s_params)

`[mu,muprime] = stabilitymu(s_params)`

calculates and
returns the stability factors *μ* and *μ′* of a 2-port
network. The input `s_params`

is a complex 2-by-2-by-*M*
array, representing *M* 2-port S-parameters.

`[mu,muprime] = stabilitymu(hs)`

calculates and
returns the stability factors for the network represented by the S-parameter object
`hs`

.

The stability factor, *μ*, defines the minimum distance between the center
of the unit Smith chart and the unstable region in the load plane. The function assumes that
port 2 is the load.

The stability factor, *μ′*, defines the minimum distance between the
center of the unit Smith chart and the unstable region in the source plane. The function assumes
that port 1 is the source.

Having *μ* > 1 or *μ′* > 1 is
the necessary and sufficient condition for the 2-port linear network to be unconditionally
stable, as described by the S-parameters.

`stabilitymu`

calculates the stability factors using the equations

$$\begin{array}{c}\mu =\frac{1-{\left|{S}_{11}\right|}^{2}}{\left|{S}_{22}-{S}_{11}^{*}\Delta \right|+\left|{S}_{21}{S}_{12}\right|}\\ \mu \prime =\frac{1-{\left|{S}_{22}\right|}^{2}}{\left|{S}_{11}-{S}_{22}^{*}\Delta \right|+\left|{S}_{21}{S}_{12}\right|}\end{array}$$

where:

*S*,_{11}*S*,_{12}*S*, and_{21}*S*are S-parameters, from the input argument_{22}`s_params`

.*Δ*is a vector whose members are the determinants of the*M*2-port S-parameter matrices:$$\Delta ={S}_{11}{S}_{22}-{S}_{12}{S}_{21}$$

*S**is the complex conjugate of the corresponding S-parameter.

The function performs these calculations element-wise for each of the *M*
S-parameter matrices in `s_params`

.

Edwards, Marion Lee, and Jeffrey H. Sinsky, “A New Criterion for Linear 2-Port
Stability Using a Single Geometrically Derived Parameter,” *IEEE Transactions on
Microwave Theory and Techniques*, Vol. 40, No. 12, pp. 2303-2311,
December 1992.

Was this topic helpful?