This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materials including this page, select Japan from the country navigator on the bottom of this page.


Display specified RF object parameters in Variable Editor


table(h,param1,format1,..., paramn,formatn)


table(h,param1,format1,..., paramn,formatn) displays the specified parameters param1 through paramn, with units format1 through formatn, in the Variable Editor. The input h is a function handle to an rfckt object.

The method creates a structure in the MATLAB workspace and constructs the name of the structure from the names of the object and parameters you provide. Specify parameters and formats in pairs. If you do not specify a format, the method uses the default format for that parameter.

To list valid parameters and parameter formats for h, use the listparam and listformat methods.

table(h,'budget',param1,format1,...,paramn,formatn) specified budget parameters of an rfckt.cascade object h.


collapse all

Construct a cascaded RFCKT object.

Cascaded_Ckt = rfckt.cascade('Ckts', ...
               {rfckt.txline('LineLength', .001), ...
               rfckt.amplifier, rfckt.txline( ...
               'LineLength', 0.025, 'PV', 2.0e8)})
Cascaded_Ckt = 

   rfckt.cascade with properties:

              Ckts: {1x3 cell}
             nPort: 2
    AnalyzedResult: []
              Name: 'Cascaded Network'

Analyze the RF cascade in frequency domain at 2.1 GHz.

freq = 2.1e9;

Plot the budget S21 and noise figure.


Display the budget S21 and noise figure in a table. The table is displayed as an excel sheet once the user runs command in the MATLAB commandline.


See Also


Introduced in R2010b

Was this topic helpful?