Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

y2s

Convert Y-parameters to S-parameters

Syntax

s_params = y2s(y_params,z0)

Description

s_params = y2s(y_params,z0) converts the admittance parameters y_params into the scattering parameters s_params. The y_params input is a complex N-by-N-by-M array, representing M N-port Y-parameters. z0 is the reference impedance. The default value of is z0 50 ohms. s_params is a complex N-by-N-by-M array, representing M N-port S-parameters.

Examples

collapse all

Define a matrix of Y-parameters.

Y11 =  0.0488133074245012 - 0.390764155450191i;
Y12 = -0.0488588365420561 + 0.390719345880018i;
Y21 = -0.0487261119282660 + 0.390851884427087i;
Y22 =  0.0487710062903760 - 0.390800401433241i;
y_params = [Y11,Y12; Y21,Y22];

Convert to s-parameters

s_params = y2s(y_params)
s_params =

   0.0038 + 0.0248i   0.9961 - 0.0250i
   0.9964 - 0.0254i   0.0037 + 0.0249i

Alternatives

You can also use network parameter objects to perform network parameter conversions. For more information, see RF Network Parameter Objects.

See Also

| | | | | | |

Introduced before R2006a

Was this topic helpful?