This example shows how to use ALSA Audio Capture and ALSA Audio Playback blocks from the PandaBoard™ block library to implement a parametric audio equalizer algorithm with a Simulink® model and to run the model on PandaBoard hardware.
|On this page…|
Parametric equalizers are used to adjust the frequency response of audio systems. For example, a parametric equalizer can be used to compensate for biases with specific speakers that have peaks and dips at different frequencies.
In this example, you will implement a parametric audio equalizer with a Simulink model and then run that model on PandaBoard hardware. The parametric equalizer algorithm in this example provides three second-order (bi-quadratic) filters whose coefficients can be adjusted to achieve a desired frequency response. A graphical user interface (GUI) is used in simulation to dynamically adjust filter coefficients and explore behavior.
The following sections will describe how the parametric equalizer algorithm is specified, how the performance can be assessed through simulation, and how the model is run on PandaBoard hardware. You will also learn how the ALSA Audio Capture and Playback blocks are used to input and output audio signals.
DSP System Toolbox™
To run this example you will need the following hardware:
PandaBoard or PandaBoard ES hardware
Headphones or speakers
Audio input source and audio cable
In this task, you will connect an audio input source, and speakers or headphones to PandaBoard hardware. The audio captured from the audio input source will be equalized on PandaBoard hardware and sent to the speakers/headphones.
1. Connect an audio source, such an MP3 player, to the AUDIO IN connector of your PandaBoard hardware. You may use the audio output of your host computer as an audio input source to PandaBoard hardware.
2. Connect speakers or headphones to the AUDIO OUT connector of the PandaBoard hardware.
In this task, you will configure and run the parametric equalizer model on PandaBoard hardware.
2. Select Tools > Run on Target Hardware > Options.... Review the parameters on the page that opens. If you performed a Firmware Update, Board information will be automatically populated with the host name, user name and password of your PandaBoard hardware. If you have not performed a Firmware Update or you need to change the board parameters, enter the IP address, user name and password of your PandaBoard hardware.
3. In the model, make sure that the Simulation mode on the toolbar is set to External.
4. In the Simulink model, double-click on the ALSA Audio Capture block. Note that the Audio sampling frequency is set to 44100 Hz and the Frame size is set to 4410. With these settings, the Equalizer algorithm processes 4410/44100(Hz) = 0.1 seconds of audio data at each sample time hit.
5. In the model, click the Run button on the toolbar to run the model on the PandaBoard hardware.
1. As the model is running on PandaBoard hardware, you will hear audio from the speakers/headphones connected to the PandaBoard hardware.
2. A GUI displaying the frequency response of the audio equalizer will appear as shown in the picture below:
3. Click and drag the markers or lines in the Three Band Equalizer GUI to specify the desired filter response characteristics. Note the change in audio output as the frequency response of the equalizer changes.
4. Press the Stop button on the model to stop model execution.
Change the volume of the sound sent to speakers/headphones by tuning the appropriate parameter in the model.
This example showed a Simulink model of a parametric audio equalizer. Using External mode, equalizer settings were changed in real-time as the model executed on PandaBoard hardware.