Other Output

Connect with output sources that other output blocks cannot


Real-Time Windows Target™


The Real-Time Windows Target Other Output block can be used for interfacing input signals that other Real-Time Windows Target output blocks do not accommodate. The Other Output block is rarely used, and for only a few drivers. For details, see the documentation for the driver that you intend to use.

If none of the available blocks, including Other Output, provide what you need, you can create your own I/O blocks to work with Real-Time Windows Target applications. See Custom I/O Driver Blocks for details.


Sample time

Enter a value representing how frequently you want the block to execute and interact with the I/O hardware. The block will also synchronize your model with the real-time clock at this sample rate.

    Tip   If you are using a fixed-step solver, you must enter the value you entered in the Fixed step size box from the Configuration Parameters dialog box, or an integer multiple of that value.

Maximum missed ticks

Enter the number of timer ticks that your model can lag behind the real-time kernel. When the model lags by more than this number, the block reports an error and simulation stops. Otherwise, simulation continues even if some ticks are missed.

Show "Missed Ticks" port

Select this check box to display the current number of missed ticks as a block output.

Yield CPU when waiting

Select this check box to grant other programs more CPU time while the kernel waits for a response from the hardware.

Output channels

Enter a channel vector that selects the analog output channels you are using on this board. The vector can be any valid MATLAB® vector form.

Optional parameters

Use this field to enter optional parameters required by the driver.

Initial value

Enter the initial value for each analog output channel you entered in the Output channels box.

Final value

Enter a final value for each analog channel you entered in the Output channels box.

Was this topic helpful?