Note: This page has been translated by MathWorks. Please click here

To view all translated materials including this page, select Japan from the country navigator on the bottom of this page.

To view all translated materials including this page, select Japan from the country navigator on the bottom of this page.

Average spectrum versus order for vibration signal

`spec = orderspectrum(x,fs,rpm)`

```
[spec,order]
= orderspectrum(x,fs,rpm)
```

```
[spec,order]
= orderspectrum(map,order)
```

`orderspectrum(___)`

`[`

computes
an average order-magnitude spectrum vector starting from an order-RPM
map and a vector of orders. Use `spec`

,`order`

]
= orderspectrum(`map`

,`order`

)`rpmordermap`

to
compute `map`

and `order`

. `map`

must
be linearly scaled. The returned amplitudes are the same as in `map`

.
The returned spectrum is scaled linearly.

`orderspectrum(___)`

with no
output arguments plots the RMS amplitude of the order spectrum, scaled
linearly, on the current figure.

[1] Brandt, Anders. *Noise and Vibration Analysis:
Signal Analysis and Experimental Procedures*. Chichester,
UK: John Wiley & Sons, 2011.

[2] Vold, Håvard, and Jan Leuridan. “High Resolution
Order Tracking at Extreme Slew Rates Using Kalman Tracking Filters.” *Shock
and Vibration*. Vol. 2, 1995, pp. 507–515.

`ordertrack`

| `orderwaveform`

| `rpmfreqmap`

| `rpmordermap`

| `tachorpm`

Was this topic helpful?