Note: This page has been translated by MathWorks. Please click here

To view all translated materials including this page, select Japan from the country navigator on the bottom of this page.

To view all translated materials including this page, select Japan from the country navigator on the bottom of this page.

Convert zero-pole-gain filter parameters to second-order sections form

`[sos,g] = zp2sos(z,p,k)`

[sos,g] = zp2sos(z,p,k,* 'order'*)

[sos,g] = zp2sos(z,p,k,

`'order'`

`'scale'`

[sos,g] = zp2sos(z,p,k,

`'order'`

`'scale'`

sos = zp2sos(...)

`zp2sos`

converts a discrete-time zero-pole-gain
representation of a given digital filter to an equivalent second-order
section representation.

`[sos,g] = zp2sos(z,p,k)`

creates a matrix `sos`

in
second-order section form with gain `g`

equivalent
to the discrete-time zero-pole-gain filter represented by input arguments `z`

, `p`

,
and `k`

. Vectors `z`

and `p`

contain
the zeros and poles of the filter's transfer function *H*(*z*),
not necessarily in any particular order.

$$H(z)=k\frac{(z-{z}_{1})(z-{z}_{2})\cdots (z-{z}_{n})}{(z-{p}_{1})(z-{p}_{2})\cdots (z-{p}_{m})}$$

where *n* and *m* are the
lengths of `z`

and `p`

, respectively,
and `k`

is a scalar gain. The zeros and poles must
be real or complex conjugate pairs. `sos`

is an *L*-by-6
matrix

$$\text{sos}=\left[\begin{array}{cccccc}{b}_{01}& {b}_{11}& {b}_{21}& 1& {a}_{11}& {a}_{21}\\ {b}_{02}& {b}_{12}& {b}_{22}& 1& {a}_{12}& {a}_{22}\\ \vdots & \vdots & \vdots & \vdots & \vdots & \vdots \\ {b}_{0L}& {b}_{1L}& {b}_{2L}& 1& {a}_{1L}& {a}_{2L}\end{array}\right]$$

whose rows contain the numerator and denominator coefficients *b _{ik}* and

$$H(z)=g{\displaystyle \prod _{k=1}^{L}{H}_{k}(z)=g{\displaystyle \prod _{k=1}^{L}\frac{{b}_{0k}+{b}_{1k}{z}^{-1}+{b}_{2k}{z}^{-2}}{1+{a}_{1k}{z}^{-1}+{a}_{2k}{z}^{-2}}}}$$

The number *L* of rows of the matrix `sos`

is
the closest integer greater than or equal to the maximum of *n*/2
and *m*/2.

`[sos,g] = zp2sos(z,p,k,`

specifies
the order of the rows in * 'order'*)

`sos`

, where `'order'`

`'down'`

, to order the sections so the first row of`sos`

contains the poles closest to the unit circle`'up'`

, to order the sections so the first row of`sos`

contains the poles farthest from the unit circle (default)

`[sos,g] = zp2sos(z,p,k,`

specifies
the desired scaling of the gain and the numerator coefficients of
all second-order sections, where * 'order'*,

`'scale'`

`'scale'`

`'none'`

, to apply no scaling (default)`'inf'`

, to apply infinity-norm scaling`'two'`

, to apply 2-norm scaling

Using infinity-norm scaling in conjunction with `up`

-ordering
minimizes the probability of overflow in the realization. Using 2-norm
scaling in conjunction with `down`

-ordering minimizes
the peak round-off noise.

Infinity-norm and 2-norm scaling are appropriate only for direct-form II implementations.

`[sos,g] = zp2sos(z,p,k,`

specifies
whether to keep together real zeros that are the negatives of each
other instead of ordering them according to proximity to poles. Setting * 'order'*,

`'scale'`

`zeroflag`

to `true`

keeps
the zeros together and results in a numerator with a middle coefficient
equal to zero. The default for `zeroflag`

is `false`

.`sos = zp2sos(...)`

embeds
the overall system gain, `g`

, in the first section, *H*_{1}(*z*),
so that

$$H(z)={\displaystyle \prod _{k=1}^{L}{H}_{k}(z)}$$

Embedding the gain in the first section when scaling a direct-form
II structure is not recommended and may result in erratic scaling.
To avoid embedding the gain, use `ss2sos`

with
two outputs.

`zp2sos`

uses a four-step algorithm to determine
the second-order section representation for an input zero-pole-gain
system:

It groups the zeros and poles into complex conjugate pairs using the

`cplxpair`

function.It forms the second-order section by matching the pole and zero pairs according to the following rules:

Match the poles closest to the unit circle with the zeros closest to those poles.

Match the poles next closest to the unit circle with the zeros closest to those poles.

Continue until all of the poles and zeros are matched.

`zp2sos`

groups real poles into sections with the real poles closest to them in absolute value. The same rule holds for real zeros.It orders the sections according to the proximity of the pole pairs to the unit circle.

`zp2sos`

normally orders the sections with poles closest to the unit circle last in the cascade. You can tell`zp2sos`

to order the sections in the reverse order by specifying the`down`

flag.`zp2sos`

scales the sections by the norm specified in theargument. For arbitrary`'scale'`

*H*(*ω*), the scaling is defined by$${\Vert H\Vert}_{p}={\left[\frac{1}{2\pi}{\displaystyle \underset{0}{\overset{2\pi}{\int}}{\left|H(\omega )\right|}^{p}d\omega}\right]}^{1/p}$$

where

*p*can be either*∞*or 2. See the references for details on the scaling. This scaling is an attempt to minimize overflow or peak round-off noise in fixed point filter implementations.

[1] Jackson, L. B. *Digital Filters
and Signal Processing*, 3rd Ed. Boston: Kluwer Academic
Publishers, 1996, chap. 11.

[2] Mitra, S. K. *Digital Signal
Processing: A Computer-Based Approach*. New York: McGraw-Hill,
1998, chap. 9.

[3] Vaidyanathan, P. P. “Robust Digital
Filter Structures.” *Handbook for Digital Signal
Processing* (S. K. Mitra and J. F. Kaiser, eds.). New York:
John Wiley & Sons, 1993, chap. 7.

Was this topic helpful?