Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

Network Parameter Data

Importing and exporting S-parameters, Y-parameters, Z-parameters, and Touchstone data files; noise data, nonlinearity data

Specify linear networks by importing network parameter and Touchstone data files directly into RF Blockset™ models.

Blocks

General Circuit ElementModel two-port network described by rfckt object
General AmplifierModel nonlinear amplifier described by rfdata object or file data
General MixerModel mixer and local oscillator described by rfdata object
General Passive NetworkModel two-port passive network described by rfdata object
S-Parameters AmplifierModel nonlinear amplifier using S-parameters
S-Parameters MixerModel mixer and local oscillator using S-parameters
S-Parameters Passive NetworkModel passive network using S-parameters
Y-Parameters AmplifierModel nonlinear amplifier using Y-parameters
Y-Parameters MixerModel mixer and local oscillator using Y-parameters
Y-Parameters Passive NetworkModel passive network using Y-parameters
Z-Parameters AmplifierModel nonlinear amplifier using Z-parameters
Z-Parameters MixerModel mixer and local oscillator using Z-parameters
Z-Parameters Passive NetworkModel passive network using Z-parameters

Examples and How To

Specify or Import Component Data

Describes how to define block behavior by entering parameter values and importing file and workspace data

Concepts

Map Network Parameters to Modeling Frequencies

Describes how RF Blockset Equivalent Baseband software determines the values of the S-parameters of the physical blocks at the modeling frequencies.

Was this topic helpful?