Model capacitor for circuit envelope analysis
RF Blockset / Circuit Envelope / Elements
The Capacitor block models a capacitor in circuit envelope environment.
Capacitance— Capacitance value
1e-12 F(default) | real number
Capacitance value, specified as a real number. Specify the units of the capacitance from the corresponding drop-down menu.
If you set this parameter value between
F, the block uses a value equal
F during simulation. By default,
the value is
This model shows how to use harmonic balance to calculate the AC steady-state frequency response curve for an LC bandpass filter built using blocks from the RF Blockset™ Circuit Envelope library.
This example shows how to use blocks from the RF Blockset™ Circuit Envelope library to simulate a transmit/receive duplex filter and calculate frequency response curves from a broadband white-noise input. Blocks from the DSP System Toolbox™ libraries generate the input signal, process the output signal, and display the results.