Note: This page has been translated by MathWorks. Click here to see

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Model constant envelope source

**Library:**RF Blockset / Circuit Envelope / Sources

The Continuous Wave block models a constant modulation on a carrier in the RF Blockset™ circuit envelope simulation environment. For an introduction to RF simulation, see the example, Simulate High Frequency Components.

The block implements the relation

$$v(t)={v}_{0}{e}^{j{\omega}_{k}t}$$

$$i(t)={i}_{0}{e}^{j{\omega}_{k}t}$$

Was this topic helpful?