Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

AD9371 Testbenches

You can use the AD9371 testbench models to analyze the functioning and values of Analog Devices® AD9371 RF transmitter, receiver, observer, sniffer, or end-to-end designs.

Install Analog Devices RF Transceivers using, simrfSupportPackages. You can open the testbench models using the Simulink® library browser and opening RF Blockset™ Models for Analog Devices RF Transceivers, or by typing the following in the MATLAB® command prompt:

open ad9371_testbenches

Click to open the AD9371 tesbench model from the library:

Note

You require these additional licenses to run this model:

  • Communications System Toolbox™

  • Stateflow®

  • Fixed-Point Designer™

Complete documentation on how to use the models is available with the software download.

open(ad93xx_getdoc)

AD9371_TX Analog Devices Transmitter Testbench

The transmitter testbench consists of:

  • CW and LTE Signal sources

  • External local oscillator signal source

  • AD9371 transmitter which is the device under test

  • Spectrum analyzer and power meter for signal visualization

AD9371_RX Analog Devices Receiver Testbench

The receiver testbench consists of:

  • CW and LTE 20 MHz Signal sources

  • External local oscillator signal source

  • AD9371 receiver which is the device under test

  • Spectrum analyzer and power meter for signal visualization

AD9371_ORX Analog Devices Observer Receiver Testbench

The observer receiver testbench consists of:

  • CW and LTE 20 MHz Signal sources

  • External local oscillator signal source

  • AD9371 receiver which is the device under test

  • Spectrum analyzer and power meter for signal visualization

AD9371_SNF Analog Devices Sniffer Receiver Testbench

The sniffer receiver testbench consists of:

  • CW and LTE 20 MHz Signal sources

  • AD9371 sniffer receiver which is the device under test

  • Spectrum analyzer and power meter for signal visualization

AD9371_TX_ORX Analog Devices Transmitter-Observer Testbench

The transmitter-observer testbench consists of:

  • CW and LTE 20 MHz Signal sources

  • External local oscillator signal source driving both transmitter and observer

  • AD9371 transmitter and observer connected via directional coupler

  • Spectrum analyzer and power meter for signal visualization

Was this topic helpful?