Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

Model Reference Function-Call

This example shows how to use a model reference block which is explicitly triggered by means of its function-call trigger port.

Example Requirements

During this example, Simulink® generates files in the current working directory. If you do not want to generate files in this directory, you should change the working directory to a suitable directory.

Open Example Model

If you haven't already opened it, open the example model.

Model Referenced Function-Call

This model contains three Model blocks: 500ms Counter, 1 sec Counter and Asynchronous Counter. These blocks reference the same model sldemo_mdlref_fcncall_cntr. The model blocks represent saturating counters which increment their output values by one each time they are explicitly triggered through their function-call trigger ports. The Stateflow® Chart Scheduler calls each Model block at its specified rate.

Simulate the Model

Now you can simulate the model sldemo_mdlref_fcncall and verify the behavior of the counters by examining the results displayed on the scope blocks.

Close the Model

Close the example model.

Was this topic helpful?