Documentation Center

  • Trial Software
  • Product Updates

Contents

mdlInitializeSizes

Specify the number of inputs, outputs, states, parameters, and other characteristics of the C MEX S-function

Required

Yes

Languages

C, C++

Syntax

#define MDL_INITIAL_SIZES
void mdlInitializeSizes(SimStruct *S)

Arguments

S

SimStruct representing an S-Function block.

Description

This is the first S-function callback methods that the Simulink® engine calls. This method performs the following tasks:

  • Specify the number of parameters that this S-function supports, using ssSetNumSFcnParams.

    Use ssSetSFcnParamTunable(S,paramIdx, 0) when a parameter cannot change during simulation, where paramIdx starts at 0. When a parameter has been specified as not tunable, the engine issues an error during simulation (or when in external mode when using the Simulink Coder™ product) if an attempt is made to change the parameter.

  • Specify the number of states that this function has, using ssSetNumContStates and ssSetNumDiscStates.

  • Configure the block's input ports, including:

    • Specify the number of input ports that this S-function has, using ssSetNumInputPorts.

    • Specify the dimensions of the input ports.

      See ssSetInputPortDimensionInfo for more information.

    • For each input port, specify whether it has direct feedthrough, using ssSetInputPortDirectFeedThrough.

      A port has direct feedthrough if the input is used in either the mdlOutputs or mdlGetTimeOfNextVarHit function. The direct feedthrough flag for each input port can be set to either 1=yes or 0=no. It should be set to 1 if the input, u, is used in the mdlOutputs or mdlGetTimeOfNextVarHit routine. Setting the direct feedthrough flag to 0 tells the Simulink engine that u is not used in either of these S-function routines. Violating this leads to unpredictable results.

  • Configure the block's output ports, including:

    If your S-function outputs are discrete (for example, the outputs only take specific values such as 0, 1, and 2), specify SS_OPTION_DISCRETE_VALUED_OUTPUT.

  • Set the number of sample times (i.e., sample rates) at which the block operates.

    There are two ways of specifying sample times:

    • Port-based sample times

    • Block-based sample times

    See Sample Times for a complete discussion of sample time issues.

    For multirate S-functions, the suggested approach to setting sample times is via the port-based sample times method. When you create a multirate S-function, you must take care to verify that, when slower tasks are preempted, your S-function correctly manages data so as to avoid race conditions. When port-based sample times are specified, the block cannot inherit a constant sample time at any port.

  • Set the size of the block's work vectors, using ssSetNumRWork, ssSetNumIWork, ssSetNumPWork, ssSetNumModes, ssSetNumNonsampledZCs.

  • Set the simulation options that this block implements, using ssSetOptions.

    All options have the form SS_OPTION_<name>. See Information and Options for information on each option. Use a bitwise OR operator to set multiple options, as in

    ssSetOptions(S, (SS_OPTION_name1 | SS_OPTION_name2))
    

    Note   If you have Simulink Coder, when generating code for a noninlined S-function that contains this method, make sure the method is not wrapped in a #if defined(MATLAB_MEX_FILE) statement. For example:

    #if defined(MATLAB_MEX_FILE) 
    static void mdlInitializeSizes(SimStruct *S) 
    { 
       /* Add mdlInitializeSizes code here *
    } 
    #endif 

    The define statement makes the mdlInitializeSizes method available only to a MATLAB® MEX file. If the S-function is not inlined, the Simulink Coder product cannot use this method, resulting in link or run-time errors.

Dynamically Sized Block Features

You can set the parameters NumContStates, NumDiscStates, NumInputs, NumOutputs, NumRWork, NumIWork, NumPWork, NumModes, and NumNonsampledZCs to a fixed nonnegative integer or tell the Simulink engine to size them dynamically:

  • DYNAMICALLY_SIZED -- Sets lengths of states, work vectors, and so on to values inherited from the driving block. It sets widths to the actual input widths, according to the scalar expansion rules unless you use mdlSetWorkWidths to set the widths.

  • 0 or positive number -- Sets lengths (or widths) to the specified values. The default is 0.

Initialization for MATLAB S-Functions

The Level-2 MATLAB S-function setup method performs nearly the same tasks as the C MEX S-function mdlInitializeSizes method.

Example

static void mdlInitializeSizes(SimStruct *S)
{
    int_T nInputPorts  = 1;  /* number of input ports  */
    int_T nOutputPorts = 1;  /* number of output ports */
    int_T needsInput   = 1;  /* direct feedthrough     */

    int_T inputPortIdx  = 0;
    int_T outputPortIdx = 0;

    ssSetNumSFcnParams(S, 0);  /* Number of expected parameters */
    if (ssGetNumSFcnParams(S) != ssGetSFcnParamsCount(S)) {
        /*
         * If the number of expected input parameters is not
         * equal to the number of parameters entered in the 
         * dialog box, return. The Simulink engine generates an
         * error indicating that there is aparameter mismatch.
         */
        return;
    }else {
		     mdlCheckParameters(S);

		     if (ssGetErrorStatus(s) != NULL)
		        return;
	   }


    ssSetNumContStates(    S, 0);
    ssSetNumDiscStates(    S, 0);


    /*
     * Configure the input ports. First set the number of input
     * ports. 
     */
    if (!ssSetNumInputPorts(S, nInputPorts)) return;    
    /*
     * Set input port dimensions for each input port index 
     * starting at 0.

    */
     if(!ssSetInputPortDimensionInfo(S, inputPortIdx,
        DYNAMIC_DIMENSION)) return;
    /*
     * Set direct feedthrough flag (1=yes, 0=no).
     */
    ssSetInputPortDirectFeedThrough(S, inputPortIdx, needsInput);

    /*
     * Configure the output ports. First set the number of 
     * output ports.
     */
    if (!ssSetNumOutputPorts(S, nOutputPorts)) return;

    /*
     * Set output port dimensions for each output port index 
     * starting at 0.
     */
    if(!ssSetOutputPortDimensionInfo(S,outputPortIdx,
        DYNAMIC_DIMENSION)) return;

    /*
     * Set the number of sample times.     */
    ssSetNumSampleTimes(S, 1);   

    /*
     * Set size of the work vectors.
     */
    ssSetNumRWork(S, 0);   /* real vector    */
    ssSetNumIWork(S, 0);   /* integer vector */
    ssSetNumPWork(S, 0);   /* pointer vector */
    ssSetNumModes(S, 0);   /* mode vector    */
    ssSetNumNonsampledZCs(S, 0);   /* zero crossings */

    ssSetOptions(S, 0);

} /* end mdlInitializeSizes */
Was this topic helpful?