Write logical value of GPIO pin configured as output
Simulink Support Package for BeagleBoard Hardware
Simulink Support Package for Gumstix Overo Hardware
Simulink Support Package for PandaBoard Hardware
Simulink Support Package for Raspberry Pi Hardware
Configure a GPIO pin on the target hardware to function as a physical output.
Send a logical value from your model to the GPIO pin. The sample time is determined by an upstream block.
The block input accepts boolean inputs.
Do not exceed the maximum voltage of the GPIO pin.
Warning You can damage your target hardware by:
Select the specific board you are using.
You can find this information on the target hardware, product packaging, or product documentation.
Changing Board updates the GPIO number choices and the View pin map diagram.
You can print the pin map to refer to it later.
After selecting the Board, select the number of the GPIO pin. Do not use the same GPIO number in multiple blocks within a model.
To see the locations of the GPIO pins on the target hardware, click the View pin map button.