Single Port RAM

Single port RAM


HDL Coder / HDL Operations


The Single Port RAM block models RAM that supports sequential read and write operations.

If you want to model RAM that supports simultaneous read and write operations, use the Dual Port RAM or Simple Dual Port RAM.

Dialog Box and Parameters

Address port width

Address bit width. Minimum bit width is 2, and maximum bit width is 32. The default is 8.

Output data during write

Controls the output data, dout, during a write access.

  • New data (default): During a write, new data appears at the output port, dout.

  • Old data: During a write, old data appears at the output port, dout.


The block has the following ports:


Data input. The data can have any width. It inherits the width and data type from the input signal.

Data type: scalar fixed point, integer, or complex


Write address.

Data type: scalar unsigned integer (uintN) or unsigned fixed point (ufixN) with a fraction length of 0


Write enable.

Data type: Boolean


Output data from address, addr.

Was this topic helpful?