Documentation Center

  • Trial Software
  • Product Updates

Contents

Compare Signal Data

In the Simulation Data Inspector, you can use the Compare Signals tab of the Signal Browser table for comparing two signals. To compare two signals:

  1. Open the Simulation Data Inspector. See Open the Simulation Data Inspector.

  2. Record simulation data or import data into the Simulation Data Inspector. See Record Simulation Data or Import Logged Signal Data.

  3. If it is not already selected, select the Compare Signals tab. By default, Signal Browser table on the Compare Signals tab displays a row for each signal data, organized by simulation runs. For more information, see Customize the Simulation Data Inspector Interface.

  4. Specify the Line Configuration for the signals that you are comparing.

  5. In the Sig 1 column, click one signal for plotting. In this column, you can select only one signal.

  6. In the Sig 2 column, click one signal for plotting. In this column, you can select only one signal.

    The Signals graph displays the signal data and the Difference graph displays the difference and tolerance values.

    For information on manipulating the graphs, see Customize the Simulation Data Inspector Interface.

  7. To create a report of the results, see Create Simulation Data Inspector Report.

Was this topic helpful?