Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

copy

Copy operating point or operating point specification

Syntax

op_point2=copy(op_point1)
op_spec2=copy(op_spec1)

Description

op_point2=copy(op_point1) returns a copy of the operating point object op_point1. You can create op_point1 with the function operpoint.

op_spec2=copy(op_spec1) returns a copy of the operating point specification object op_spec1. You can create op_spec1 with the function operspec.

    Note   The command op_point2=op_point1 does not create a copy of op_point1 but instead creates a pointer to op_point1. In this case, any changes made to op_point2 are also made to op_point1.

Examples

Create an operating point object for the model, magball.

opp=operpoint('magball')

The operating point is displayed.

 Operating Point for the Model magball.
 (Time-Varying Components Evaluated at time t=0)

States: 
----------
(1.) magball/Controller/PID Controller/Filter
      x: 0            
(2.) magball/Controller/PID Controller/Integrator
      x: 14           
(3.) magball/Magnetic Ball Plant/Current
      x: 7            
(4.) magball/Magnetic Ball Plant/dhdt
      x: 0            
(5.) magball/Magnetic Ball Plant/height
      x: 0.05         
 
Inputs: None 
----------

Create a copy of this object, opp.

new_opp=copy(opp)    

An exact copy of the object is displayed.

Operating Point for the Model magball.
 (Time-Varying Components Evaluated at time t=0)

States: 
----------
(1.) magball/Controller/PID Controller/Filter
      x: 0            
(2.) magball/Controller/PID Controller/Integrator
      x: 14           
(3.) magball/Magnetic Ball Plant/Current
      x: 7            
(4.) magball/Magnetic Ball Plant/dhdt
      x: 0            
(5.) magball/Magnetic Ball Plant/height
      x: 0.05         
 
Inputs: None 
----------

Introduced before R2006a

Was this topic helpful?