Note: This page has been translated by MathWorks. Please click here

To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

This example shows how to model the opening shot of pool using continuous time semantics of Stateflow®. There are 15 balls arranged in a triangular grid near one end of the table and the cue ball is released towards them from the other end of the table. This example is meant as an exercise in explaining how the continuous time features of Stateflow can be used to very simply express systems which have a large number of discontinuous events which rapidly (and unpredictably) change the evolution of the system.

We make several simplifying assumptions in simulating the system. Perhaps the most important simplification is that we completely ignore the "spin" of the balls. In other words, the over-all state of the system is described completely by the positions and velocities of the individual balls.

**Friction Model**

We use a simplified friction model where we assume that a ball which is moving is acted upon by a friction force of constant magnitude which acts opposite to the direction of motion. In other words:

where

Note however that the friction force acts only as long as the ball is actually moving, not when it is stationary. Thus we should more accurately be saying:

This implies that the friction dynamics of the pool balls have an inherent modal description which we need to account for when we model the system.

**Collision Dynamics**

Collision between balls is modeled using a simple restoring force model. In other words, we model the balls as being very slightly springy. When the balls are in contact, the reaction force between them is given by:

where

Note once again that any two balls have a restoring force acting between them only so long as

otherwise the restoring force is zero. Note also that since the balls are free to move in two dimensions, we need to account for `N^2/2`

potential collisions.

The model consists of two Stateflow charts and one MATLAB Function block. The chart `Init`

is responsible for the initial setup of the pool balls on the table and interactively letting the user choose the initial position and velocity of the cue ball. Note that this chart is a very thin wrapper around a MATLAB® function `sf_pool_plotter.m`

which does the actual work of plotting.

The middle chart `Pool`

is the chart which actually contains the description of the pool ball dynamics. We will explore this chart in greater detail later.

The final MATLAB™ Function block `Plot`

is responsible for animating the balls during the simulation. Once again this is a very thin wrapper around `sf_pool_plotter.m`

**Chart: Pool** This chart is responsible for the majority of the work during the simulation.

In order to represent the dynamics of the pool table, we use the following variables

**Continuous Time Variables**

`p`

An`Nx2`

matrix whose`i^th`

row represents the position of the`i^th`

ball.`v`

An`Nx2`

matrix whose`i^th`

row represents the velocity of the`i^th`

ball.

**Discrete Time Variables**

`ball_interaction`

An`NxN`

boolean matrix which represents the interactions between the balls. If`ball_interaction(i,j)`

is true, it means that the`i^th`

ball and the`j^th`

ball are presently in contact. Note that due to the symmetric nature of the system, we only use the upper triangular portion of this matrix.`stopped`

An`Nx1`

boolean vector which represents whether a ball is presently moving or whether it is stopped.`last_vel`

An`Nx2`

vector which represents the velocity of the balls. We update this vector after each incident which could change the velocity of a ball.`last_vel`

and`stopped`

are both used in the function`frictionForce`

which models the friction between the balls and the table.

**Friction Force Model**

function f = frictionForce % This function calculates the forces on the balls due to friction from the % table. We use a simple constant friction force model between the ball % and the table. f = zeros(N,2); for i=1:N if stopped(i) continue else % Note that we are using last_vel to calculate the direction of % the friction force because we are guaranteed that % |last_vel(i,:)| is large when stopped(i) is false. We cannot % use v(i,:) directly because this function gets called in minor % time steps and v(i,:) can become very small at some minor time % step even if it was large at the previous major time-step. f(i,:) = -kfriction*last_vel(i,:)/norm(last_vel(i,:)); %#ok end end

Upon simulation, a very bare-bones GUI of a pool table is shown with 15 balls arranged in a triangular grid at one end of the table. The user is asked to place the cue ball and choose its initial velocity. The system then simulates the evolution of the pool balls while animating their motion.

Was this topic helpful?