|
|
|
| R2011b Documentation → Communications System Toolbox | |
Learn more about Communications System Toolbox |
|
| Contents | Index |
dop = doppler.flat
dop = doppler.flat creates a flat Doppler spectrum object that is to be used for the DopplerSpectrum property of a channel object (created with either the rayleighchan or the ricianchan function). The maximum Doppler shift of the flat Doppler spectrum object is specified by the MaxDopplerShift property of the channel object.
The flat Doppler spectrum object contains only one property, SpectrumType, which is read-only and has a fixed value of 'Flat'.
In a 3-D isotropic scattering environment, where the angles of arrival are uniformly distributed in the azimuth and elevation planes, the Doppler spectrum is found theoretically to be flat [2]. A flat Doppler spectrum is also specified in some cases of the ANSI J-STD-008 reference channel models for PCS, for both outdoor (pedestrian) and indoor (commercial) [1] applications.
The normalized flat Doppler power spectrum is given analytically by:
where
is the maximum Doppler frequency.
[1] ANSI J-STD-008, Personal Station-Base Station Compatibility Requirements for 1.8 to 2.0 GHz Code Division Multiple Access (CDMA) Personal Communications Systems, March 1995.
[2] Clarke, R. H., and Khoo, W. L., "3-D Mobile Radio Channel Statistics", IEEE Trans. Veh. Technol., Vol. 46, No. 3, pp. 798–799, August 1997.
doppler | doppler.ajakes | doppler.bell | doppler.bigaussian | doppler.gaussian | doppler.jakes | doppler.rjakes | doppler.rounded | rayleighchan | ricianchan | stdchan
Learn how to apply early verification to your development process through these technical resources.
How much time do you spend on testing to ensure implementation meets system-level requirements?
| © 1984-2012- The MathWorks, Inc. - Site Help - Patents - Trademarks - Privacy Policy - Preventing Piracy - RSS |
