setupxilinxtools - Configure MATLAB environment for use with Xilinx FPGA Automation and Filter Design HDL Coder

Syntax

Description

setupxilinxtools performs the following tasks so that your environment is optimally set up to use Xilinx^® FPGA Automation:

• Verifies that the XILINX system environment variable is defined and points to a valid Xilinx ISE installation

• Checks whether your platform and Xilinx ISE version is supported for FPGA Automation

• Adds any paths to your MATLAB search path for using Xilinx FPGA Automation.

setupxilinxtools(isepath) performs the same validations as setupxilinxtools and also uses the value in isepath to set the XILINX environment variable. If isepath points to a valid ISE installation, setupxilinxtools(isepath) also adds that ISE installation on the system path.

All changes to system environment variables, system path, or MATLAB search path using setupxilinxtools(...) apply to the current MATLAB session only.

Examples

Enter the following command at the MATLAB command prompt:

>>setupxilinxtools

Enter the following command at the MATLAB command prompt, substituting the value in isepath below with a valid ISE installation for your machine:

>>setupxilinxtools('C:\Xilinx\12.1\ISE')

© 1984-2012- The MathWorks, Inc.    -   Site Help   -   Patents   -   Trademarks   -   Privacy Policy   -   Preventing Piracy   -   RSS