Using fimath ProductMode and SumMode

On this page…
Example Setup FullPrecision KeepLSB KeepMSB SpecifyPrecision

Example Setup

The examples in the sections of this topic show the differences among the four settings of the ProductMode and SumMode properties:

• FullPrecision

• KeepLSB

• KeepMSB

• SpecifyPrecision

To follow along, first set the following preferences:

p = fipref;
p.NumericTypeDisplay = 'short';
p.FimathDisplay = 'none';
p.LoggingMode = 'on';
F = fimath('OverflowMode','wrap','RoundMode','floor',...
		'CastBeforeSum',false);
warning off
format compact

Next, define fi objects a and b. Both have signed 8-bit data types. The fraction length gets chosen automatically for each fi object to yield the best possible precision:

a = fi(pi, true, 8)
a =
    3.1563
      s8,5

b = fi(exp(1), true, 8)
b =
    2.7188
      s8,5

Back to Top

FullPrecision

Now, set ProductMode and SumMode for a and b to FullPrecision and look at some results:

F.ProductMode = 'FullPrecision';
F.SumMode = 'FullPrecision';
a.fimath = F;
b.fimath = F;
a
a =
    3.1563			%011.00101
      s8,5

b
b =
    2.7188			%010.10111
      s8,5

a*b
ans =
    8.5811			%001000.1001010011
      s16,10

a+b
ans =
    5.8750			%0101.11100
      s9,5

In FullPrecision mode, the product word length grows to the sum of the word lengths of the operands. In this case, each operand has 8 bits, so the product word length is 16 bits. The product fraction length is the sum of the fraction lengths of the operands, in this case 5 + 5 = 10 bits.

The sum word length grows by one most significant bit to accommodate the possibility of a carry bit. The sum fraction length aligns with the fraction lengths of the operands, and all fractional bits are kept for full precision. In this case, both operands have 5 fractional bits, so the sum has 5 fractional bits.

Back to Top

KeepLSB

Now, set ProductMode and SumMode for a and b to KeepLSB and look at some results:

F.ProductMode = 'KeepLSB';
F.ProductWordLength = 12;
F.SumMode = 'KeepLSB';
F.SumWordLength = 12;
a.fimath = F;
b.fimath = F;
a
a =
    3.1563			%011.00101
      s8,5

b
b =
    2.7188			%010.10111
      s8,5

a*b
ans =
    0.5811			%00.1001010011
      s12,10

a+b
ans =
    5.8750			%0000101.11100
      s12,5

In KeepLSB mode, you specify the word lengths and the least significant bits of results are automatically kept. This mode models the behavior of integer operations in the C language.

The product fraction length is the sum of the fraction lengths of the operands. In this case, each operand has 5 fractional bits, so the product fraction length is 10 bits. In this mode, all 10 fractional bits are kept. Overflow occurs because the full-precision result requires 6 integer bits, and only 2 integer bits remain in the product.

The sum fraction length aligns with the fraction lengths of the operands, and in this model all least significant bits are kept. In this case, both operands had 5 fractional bits, so the sum has 5 fractional bits. The full-precision result requires 4 integer bits, and 7 integer bits remain in the sum, so no overflow occurs in the sum.

Back to Top

KeepMSB

Now, set ProductMode and SumMode for a and b to KeepMSB and look at some results:

F.ProductMode = 'KeepMSB';
F.ProductWordLength = 12;
F.SumMode = 'KeepMSB';
F.SumWordLength = 12;
a.fimath = F;
b.fimath = F;
a
a =
    3.1563			%011.00101
      s8,5

b
b =
    2.7188			%010.10111
      s8,5

a*b
ans =
    8.5781			%001000.100101
      s12,6

a+b
ans =
    5.8750			%0101.11100000
      s12,8

In KeepMSB mode, you specify the word lengths and the most significant bits of sum and product results are automatically kept. This mode models the behavior of many DSP devices where the product and sum are kept in double-wide registers, and the programmer chooses to transfer the most significant bits from the registers to memory after each operation.

The full-precision product requires 6 integer bits, and the fraction length of the product is adjusted to accommodate all 6 integer bits in this mode. No overflow occurs. However, the full-precision product requires 10 fractional bits, and only 6 are available. Therefore, precision is lost.

The full-precision sum requires 4 integer bits, and the fraction length of the sum is adjusted to accommodate all 4 integer bits in this mode. The full-precision sum requires only 5 fractional bits; in this case there are 8, so there is no loss of precision.

Back to Top

SpecifyPrecision

Now set ProductMode and SumMode for a and b to SpecifyPrecision and look at some results:

F.ProductMode = 'SpecifyPrecision';
F.ProductWordLength = 8;
F.ProductFractionLength = 7;
F.SumMode = 'SpecifyPrecision';
F.SumWordLength = 8;
F.SumFractionLength = 7;
a.fimath = F;
b.fimath = F;
a
a =
    3.1563			%011.00101
      s8,5

b
b =
    2.7188			%010.10111
      s8,5

a*b
ans =
    0.5781			%0.1001010
      s8,7

a+b
ans =
   -0.1250			%1.1110000
      s8,7

In SpecifyPrecision mode, you must specify both word length and fraction length for sums and products. This example unwisely uses fractional formats for the products and sums, with 8-bit word lengths and 7-bit fraction lengths.

The full-precision product requires 6 integer bits, and the example specifies only 1, so the product overflows. The full-precision product requires 10 fractional bits, and the example only specifies 7, so there is precision loss in the product.

The full-precision sum requires 4 integer bits, and the example specifies only 1, so the sum overflows. The full-precision sum requires 5 fractional bits, and the example specifies 7, so there is no loss of precision in the sum.

Back to Top

Using fimath to Share Arithmetic Rules

fimath Object Functions

© 1984-2012- The MathWorks, Inc.    -   Site Help   -   Patents   -   Trademarks   -   Privacy Policy   -   Preventing Piracy   -   RSS