rfckt.datafile class - Package: rfckt

Component or network from file data

Syntax

Description

Use the datafile class to represent RF components and networks that are characterized by measured or simulated data in a file.

h = rfckt.datafile returns a circuit object whose properties all have their default values.

h = rfckt.datafile('Property1',value1,'Property2',value2,...) returns a circuit object, h, based on the specified properties. Properties that you do not specify retain their default values.

Use the read method to read the data from a file in one of the following formats:

• Touchstone

• Agilent P2D

• Agilent S2D

• AMP

See AMP File Format for information about the .amp format.

Properties

AnalyzedResult	Computed S-parameters, noise figure, OIP3, and group delay values
File	File containing circuit data
IntpType	Interpolation method
Name	Object name
nPort	Number of ports

Methods

analyze	Analyze circuit object in frequency domain
calculate	Calculate specified parameters for circuit object
circle	Draw circles on Smith chart
extract	Extract array of network parameters from data object
listformat	List valid formats for specified circuit object parameter
listparam	List valid parameters for specified circuit object
loglog	Plot specified circuit object parameters using log-log scale
plot	Plot specified circuit object parameters on X-Y plane
plotyy	Plot specified object parameters with y-axes on both left and right sides
polar	Plot specified circuit object parameters on polar coordinates
read	Read RF data from file to new or existing circuit or data object
restore	Restore data to original frequencies
semilogx	Plot specified circuit object parameters using log scale for x-axis
semilogy	Plot specified circuit object parameters using log scale for x-axis
smith	Plot specified circuit object parameters on Smith chart
write	Write RF data from circuit or data object to file

Examples

data=rfckt.datafile('File','default.s2p')
 
data =
 
           Name: 'Data File'
           nPort: 2
           AnalyzedResult: [1x1 rfdata.data]
           IntpType: 'Linear'
           File: 'default.s2p'

References

EIA/IBIS Open Forum, Touchstone File Format Specification, Rev. 1.1, 2002 (http://www.vhdl.org/pub/ibis/connector/touchstone_spec11.pdf).

See Also

http://www.vhdl.org/pub/ibis/connector/touchstone_spec11.pdf | rfckt.amplifier | rfckt.mixer | rfckt.passive

© 1984-2012- The MathWorks, Inc.    -   Site Help   -   Patents   -   Trademarks   -   Privacy Policy   -   Preventing Piracy   -   RSS