rfckt.parallelplate class - Package: rfckt

Parallel-plate transmission line

Syntax

h = rfckt.parallelplate h = rfckt.parallelplate('Property1',value1,'Property2',value2,...)

Description

Use the parallelplate class to represent parallel-plate transmission lines that are characterized by line dimensions and optional stub properties.

A parallel-plate transmission line is shown in cross-section in the following figure. Its physical characteristics include the plate width w and the plate separation d.

h = rfckt.parallelplate returns a parallel-plate transmission line object whose properties are set to their default values.

h = rfckt.parallelplate('Property1',value1,'Property2',value2,...) returns a parallel-plate transmission line object, h, with the specified properties. Properties that you do not specify retain their default values.

Properties

AnalyzedResult	Computed S-parameters, noise figure, OIP₃, and group delay values
EpsilonR	Relative permittivity of dielectric
LineLength	Parallel-plate line length
LossTangent	Tangent of loss angle
MuR	Relative permeability of dielectric
Name	Object name
nPort	Number of ports
Separation	Distance between plates
SigmaCond	Conductor conductivity
StubMode	Type of stub
Termination	Stub transmission line termination
Width	Transmission line width

Methods

analyze	Analyze circuit object in frequency domain
calculate	Calculate specified parameters for circuit object
circle	Draw circles on Smith chart
getz0	Characteristic impedance of transmission line object
listformat	List valid formats for specified circuit object parameter
listparam	List valid parameters for specified circuit object
loglog	Plot specified circuit object parameters using log-log scale
plot	Plot specified circuit object parameters on X-Y plane
plotyy	Plot specified object parameters with y-axes on both left and right sides
polar	Plot specified circuit object parameters on polar coordinates
semilogx	Plot specified circuit object parameters using log scale for x-axis
semilogy	Plot specified circuit object parameters using log scale for x-axis
smith	Plot specified circuit object parameters on Smith chart
write	Write RF data from circuit or data object to file

Examples

tx1=rfckt.parallelplate('LineLength',0.045)
 
tx1 =
 
           Name: 'Parallel-Plate Transmission Line'
           nPort: 2
           AnalyzedResult: []
           LineLength: 0.0450
           StubMode: 'NotAStub'
           Termination: 'NotApplicable'
           Width: 0.0050
           Separation: 1.0000e-003
           MuR: 1
           EpsilonR: 2.3000
           LossTangent: 0
           SigmaCond: Inf

References

Pozar, David M. Microwave Engineering, John Wiley & Sons, Inc., 2005.

Search MATLAB Documentation
R2012a Documentation → RF Toolbox
View documentation for other releases	Learn more about RF Toolbox