|
|
|
| R2012a Documentation → RF Blockset | |
Learn more about RF Blockset |
|
| Contents | Index |
Ladders Filters sublibrary of the Physical library
The Shunt RLC block models the shunt RLC network described in the block dialog box, in terms of its frequency-dependent S-parameters.
For the given resistance, inductance, and capacitance, the block first calculates the ABCD-parameters at each frequency contained in the vector of modeling frequencies, and then converts the ABCD-parameters to S-parameters using the RF Toolbox abcd2s function. See the Output Port block reference page for information about determining the modeling frequencies.
For this circuit, A = 1, B = 0, C = Y, and D = 1, where
and
.
The shunt RLC object is a two-port network as shown in the following circuit diagram.
Scalar value for the resistance. The value must be nonnegative.
Scalar value for the inductance. The value must be nonnegative.
Scalar value for the capacitance. The value must be nonnegative.
For information about plotting the filter parameters, see Plotting Model Data.
General Passive Network, LC Bandpass Pi, LC Bandpass Tee, LC Bandstop Pi, LC Bandstop Tee, LC Highpass Pi, LC Highpass Tee, LC Lowpass Pi, LC Lowpass Tee, Series C, Series L, Series R, Series RLC, Shunt C, Shunt L, Shunt R
Learn more about Simulink through this collection of videos, articles, technical literature and the Getting Started with Simulink Guide.
| © 1984-2012- The MathWorks, Inc. - Site Help - Patents - Trademarks - Privacy Policy - Preventing Piracy - RSS |
