watertank Simulink Model

The Simulink model watertank model includes the nonlinear Water-Tank System plant and a PI controller in a single-loop feedback system.

The Water-Tank System is shown in the following figure.

Water enters the tank from the top at a rate proportional to the voltage, V, applied to the pump. The water leaves through an opening in the tank base at a rate that is proportional to the square root of the water height, H, in the tank. The presence of the square root in the water flow rate results in a nonlinear plant.

The following table describes the variables, parameters, differential equations, states, inputs, and outputs of the Water-Tank System.

Variables	H is the height of water in the tank. Vol is the volume of water in the tank. V is the voltage applied to the pump.
Parameters	A is the cross-sectional area of the tank. b is a constant related to the flow rate into the tank. a is a constant related to the flow rate out of the tank.
Differential equation
States	H
Inputs	V
Outputs	H

Bode Response of Simulink Model

PID Control Design

© 1984-2012- The MathWorks, Inc.    -   Site Help   -   Patents   -   Trademarks   -   Privacy Policy   -   Preventing Piracy   -   RSS