Documentation

Vehicle Network Toolbox Properties

CAN Communication

Hardware Connection

BusLoad Display load on CAN bus
Database Store CAN database information
MessageReceivedFcn Specify function to run
MessageReceivedFcnCount Specify number of messages available before function is triggered
Running Determine status of CAN channel
SilentMode Specify if channel is active or silent
TransceiverName Display name of CAN transceiver
TransceiverState Display state or mode of CAN transceiver
UserData Enter custom data
Device Display CAN channel device type
Device(NI) Display NI CAN channel device type
DeviceChannelIndex Display CAN device channel index
DeviceSerialNumber Display CAN device serial number
DeviceVendor Display device vendor name
InitializationAccess Determine control of device channel
BusSpeed List the 7 Messages and Message properties in alpha order.Display speed of CAN bus
NumOfSamples Display number of samples available to channel
SJW Display synchronization jump width (SJW) of bit time segment
TSEG1 Display amount that channel can lengthen sample time
TSEG2 Display amount that channel can shorten sample time

Transmit Messages

Data Set CAN message data
Database Store CAN database information
Error CAN message error frame
Extended Identifier type for CAN message
ID Identifier for CAN message
Name (Message) CAN message name
Remote Specify CAN message remote frame
Signals Display physical signals defined in CAN message
Timestamp Display message received timestamp
UserData Enter custom data

Receive Messages

MessageReceivedFcn Specify function to run
MessageReceivedFcnCount Specify number of messages available before function is triggered
MessagesAvailable Display number of messages available to be received by CAN channel
MessagesReceived Display number of messages received by CAN channel
MessagesTransmitted Display number of messages transmitted by CAN channel
ReceiveErrorCount Display number of received errors detected by channel
TransmitErrorCount Display number of transmitted errors by channel

Message Database

Messages Store message names from CAN database
Name (Database) CAN database name
Path Display CAN database directory path
UserData Enter custom data

XCP Communication

Message Database

Events Display A2L events list
Measurements Display A2L measurements list
DAQInfo Data acquisition information in A2L file
SlaveName Name of connected slave
FileName Name of referenced A2L file
FilePath Path of A2L file
ProtocolLayerInfo Protocol layer information
TransportLayerCANInfo CAN transport layer information

Hardware Connection

A2LFileName Name of the A2L file
SeedKeyDLL Name of seed and key security access dll
SlaveName Name of connected slave
TransportLayer Transport layer type
TransportLayerDevice XCP transport layer connection

Acquire and Stimulate Measurements

A2LFileName Name of the A2L file
SeedKeyDLL Name of seed and key security access dll
SlaveName Name of connected slave
TransportLayer Transport layer type
TransportLayerDevice XCP transport layer connection
Was this topic helpful?