Asynchronous Interrupt Handler for Frame Based Acquisition with Multiple Boards

This model shows how to use the frame-based acquisition mode of the UEI MF and MFS boards in multi-board configurations.

Note: Both IRQ Source blocks must be modified before running this model. Because two boards are required, you must set the PCI slot parameter to the [bus,slot] allocated to each board. Use SimulinkRealTime.getPCIInfo to find this information. In this example, the slot parameters for the two boards are set to [2,10] and [2,11], but they must be changed to match your hardware configuration.

See also xpcUEIasyncdemo

Was this topic helpful?