PCL-818H Digital Output block (not recommended)
Simulink® Real-Time™ Library of Drivers No Longer Recommended for Use
Block Input Data Type
<0.5 = TTL low
Enter numbers between 1 and 16. This driver allows the selection of individual digital output lines in arbitrary order. The number of elements defines the number of digital lines you use.
For example, to use the first eight digital outputs, enter
Number the lines beginning with 1 even if this board manufacturer starts numbering the lines with 0.
Enter the base sample time or a multiple of the base sample
-1 means sample time is inherited).
Enter the base address of the board. This entry must correspond
to the DIP switch setting on the board. For example, if the DIP switch
setting is 300 (hexadecimal), enter