AIM12 Digital Output (not recommended)
Simulink® Real-Time™ Library of Drivers No Longer Recommended for Use
I/O Module Output
Block Input Data Type
< 0.5 = TTL low
Enter numbers between 1 and 8 to select the digital input lines to be read. This driver allows the selection of individual digital input lines in arbitrary order. The number of elements defines the number of digital lines used. For example, to use all of the digital inputs enter
[1, 2, 3, 4, 5, 6, 7, 8]
Number the channels beginning with 1 even if this board manufacturer numbers them beginning with 0.
Lower 8 bits to connect to channels
1 through 8 or
Upper 8 bits to connect to channels
9 through 16.
Enter the base sample time or a multiple of the base sample
-1 means sample time is inherited).
Enter the base address of the board. This entry must correspond
to the DIP switch setting on the board. For example, if the DIP switch
setting is 300 (hexadecimal), enter