Contec AD16-16(PCI)E Analog Input block (not recommended)
Simulink® Real-Time™ Library of Drivers No Longer Recommended for Use.
To open this library, type
xpcobsoletelib in the Command
I/O Module Input
Block Output Data Type
Enter a vector of numbers to specify the input channels. For example, to use the first three analog input (A/D) channels, enter
[1, 2, 3]
The channel numbers can occur in arbitrary order. Number them beginning with 1 even if this board manufacturer numbers them beginning with 0. The maximum allowable channel number for this board is 8 (differential-ended) or 16 (single-ended).
From the list, select
Bipolar -10V to +10V,
Bipolar -5V to +5V,
Unipolar 0V to
Unipolar 0V to +10V. This value
is replicated over the channel vector.
Enter the base sample time or a multiple of the base sample
-1 means sample time is inherited).
If only one board of this type is in the target computer, enter
locate the board.
If two or more boards of this type are in the target computer, enter the bus number and the
PCI slot number of the board associated with this driver block. Use the format
To determine the bus number and the PCI slot number, type:
tg = slrt; getPCIInfo(tg, 'installed')